EPC2007C GaNFET N-Channel 100V 6A Die Equivalent & Substitute Parts

Part Overview

The EPC2007C is an N-Channel GaNFET (Gallium Nitride Field Effect Transistor) rated for 100V drain-to-source voltage with 6A continuous drain current at 25°C. This component is supplied as a surface mount die in tape and reel packaging. The EPC2007C carries a product status of "Not For New Designs," indicating that EPC has transitioned this part away from active development. For applications requiring continued component qualification or new design implementations, substitute parts with compatible electrical and mechanical parameters must be evaluated.

Substiute Parts

EPC2007C

EPCIn Stock: 29111EPC2007C Datasheet

Current PartRFQ

EPC2051

EPCIn Stock: 1603EPC2051 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EPC2007C is constrained by the following critical electrical and mechanical parameters:

Voltage Rating Compatibility: The substitute part must maintain the 100V Vdss rating to ensure safe operation within the same voltage domain.

Current Rating Consideration: The EPC2007C is rated for 6A continuous drain current. The substitute EPC2051 is rated for 1.7A continuous drain current. This represents a reduction in current-handling capability. Substitution is valid only when the application circuit operates at or below 1.7A continuous drain current.

On-Resistance (Rds On): The EPC2007C specifies 30 mOhm maximum at 6A and 5V gate drive. The EPC2051 specifies 25 mOhm maximum at 3A and 5V gate drive. Lower on-resistance in the substitute part does not preclude substitution; however, the reduced current rating must be observed.

Gate Charge and Input Capacitance: Both parameters are comparable between parts (Qg: 2.2 nC vs. 2.1 nC; Ciss: 220 pF vs. 258 pF), indicating similar switching characteristics.

Package and Mounting: Both parts are supplied as surface mount dies in tape and reel packaging, ensuring mechanical compatibility.

Compliance and Status: The EPC2051 carries "Active" product status, making it suitable for new designs. Both parts are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99.

Parameter Comparison

Engineering Selection Recommendations

For Existing Designs Using EPC2007C:

The EPC2007C remains available with 29,088 pieces in stock. Continuation of this part in production is supported by current inventory levels. No immediate substitution is required for ongoing production of existing designs.

For New Design Implementation:

The EPC2051 is the designated substitute for new designs. This part carries "Active" product status and is manufactured by the same supplier (EPC) within the same eGaN® series. Both parts maintain identical voltage ratings (100V Vdss) and operating temperature ranges (-40°C to 150°C).

Critical Substitution Constraint:

The EPC2051 is rated for 1.7A maximum continuous drain current, compared to 6A for the EPC2007C. Substitution is valid only when circuit design ensures drain current does not exceed 1.7A at 25°C ambient temperature. Applications requiring continuous drain currents above 1.7A cannot use the EPC2051 as a substitute.

Compliance Alignment:

Both parts are RoHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS classifications. Regulatory and environmental compliance requirements are equivalent between the two parts.

Frequently Asked Questions (FAQ)

Q: Can the EPC2051 be used as a direct replacement for the EPC2007C in all applications?

A: No. The EPC2051 has a lower continuous drain current rating (1.7A versus 6A). Direct substitution is valid only when the application circuit operates at or below 1.7A continuous drain current at 25°C. Circuit redesign or thermal management modifications may be required for applications originally designed for the full 6A capability of the EPC2007C.

Q: What is the significance of the "Not For New Designs" status on the EPC2007C?

A: This status indicates that EPC has concluded active development and qualification of the EPC2007C. New product designs should not incorporate this part. The EPC2051, with "Active" status, is the recommended alternative for new implementations within the same voltage and technology class.

Q: Are the package and mounting specifications identical between EPC2007C and EPC2051?

A: Yes. Both parts are supplied as surface mount dies in tape and reel (TR) packaging. Mechanical compatibility is confirmed. No changes to assembly or handling procedures are required based on package differences.

Q: How do the on-resistance specifications compare?

A: The EPC2007C specifies 30 mOhm maximum at 6A and 5V gate drive. The EPC2051 specifies 25 mOhm maximum at 3A and 5V gate drive. The EPC2051 exhibits lower on-resistance; however, this advantage is only realized within its 1.7A current rating. At the EPC2051's maximum rated current, on-resistance performance is superior, but the absolute current-handling capability is reduced.

Q: Do gate charge and input capacitance differences affect substitution?

A: Gate charge (Qg) and input capacitance (Ciss) are comparable between parts and do not present substitution barriers. EPC2007C: Qg = 2.2 nC, Ciss = 220 pF. EPC2051: Qg = 2.1 nC, Ciss = 258 pF. These minor variations fall within normal design tolerances for GaNFET switching applications.

Q: Are there any compliance or regulatory differences between the two parts?

A: No. Both parts are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS codes. Regulatory and environmental compliance requirements are equivalent.

Q: What inventory status should influence substitution decisions?

A: The EPC2007C has 29,088 pieces in stock, while the EPC2051 has 1,500 pieces available. For existing production, the EPC2007C inventory supports continued manufacturing. For new designs, the EPC2051 inventory is sufficient for qualification and initial production runs, with the understanding that this part carries active manufacturer support.