EMI1210R-60 Equivalent & Substitute Parts

Part Overview

The EMI1210R-60 is a ferrite bead with 60 ohms impedance at 100 MHz, manufactured by API Delevan Inc. in a 1210 (3225 metric) surface mount package. This component is designed for electromagnetic interference (EMI) suppression in single-line signal filtering applications. The part is Active status and RoHS3 compliant, meeting current regulatory requirements for electronic component manufacturing. Substitute parts are identified when design flexibility is needed due to inventory availability, manufacturer preference, or alternative sourcing strategies while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Impedance @ 100 MHz	60 Ohms
Package / Case	1210 (3225 Metric)
Current Rating (Max)	400 mA
DC Resistance (Max)	300 mOhm
Operating Temperature Range	-55°C ~ 125°C
Mounting Type	Surface Mount
Physical Dimensions	0.126" L x 0.098" W (3.20 mm x 2.50 mm)
Height (Max)	0.059" (1.50 mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the EMI1210R-60 are categorized based on strict adherence to the following allowable parameters:

Critical matching parameters:

Package / Case: 1210 (3225 Metric) — must be identical for PCB assembly compatibility
Mounting Type: Surface Mount — ensures compatibility with automated assembly equipment
Physical dimensions (L, W, H) — all substitutes must match specified dimensions
Operating Temperature Range: -55°C ~ 125°C — minimum required operational envelope
Moisture Sensitivity Level: 1 — unlimited MSL rating for storage and handling

Electrical performance parameters:

Impedance @ 100 MHz: 60 Ohms or 52 Ohms — impedance values within the ferrite bead series determine filtering effectiveness
Current Rating (Max): 400 mA minimum — electrical capability threshold
DC Resistance (Max): 300 mOhm — maximum allowable parasitic resistance

Substitute parts are further divided into two categories:

Exact Electrical Match (60 Ohm @ 100 MHz): Parts maintaining identical impedance to the primary part
Parametric Equivalent (52 Ohm @ 100 MHz): Parts with impedance variation within the ferrite bead product series, suitable for applications with flexible impedance requirements

All substitute parts are Active status products with compliant regulatory certifications (RoHS3 or RoHS Compliant, REACH Unaffected).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Impedance @ 100 MHz	Current Rating (Max)	DC Resistance (Max)	Package / Case	RoHS Status	Packaging Type
EMI1210R-60	API Delevan Inc.	60 Ohms	400 mA	300 mOhm	1210 (3225 Metric)	ROHS3 Compliant	Tape & Reel (TR)
BMC2EY0060AN	TE Connectivity Passive Product	60 Ohms	400 mA	300 mOhm	1210 (3225 Metric)	ROHS3 Compliant	Cut Tape (CT)
BMC2EY0052AN	TE Connectivity Passive Product	52 Ohms	400 mA	300 mOhm	1210 (3225 Metric)	ROHS3 Compliant	Cut Tape (CT)
FB322513T-600Y-S-1	Cal-Chip Electronics, Inc.	60 Ohms	500 mA	300 mOhm	1210 (3225 Metric)	RoHS Compliant	Tape & Reel (TR)
FB322513T-600Y-S	Cal-Chip Electronics, Inc.	60 Ohms	400 mA	300 mOhm	1210 (3225 Metric)	RoHS Compliant	Tape & Reel (TR)
FB322513T-520Y-S	Cal-Chip Electronics, Inc.	52 Ohms	400 mA	300 mOhm	1210 (3225 Metric)	RoHS Compliant	Tape & Reel (TR)
ILBB1210ER600V	Vishay Dale	60 Ohms	400 mA	300 mOhm	1210 (3225 Metric)	ROHS3 Compliant	Tape & Reel (TR)

Engineering Selection Recommendations

Direct Replacement (60 Ohm @ 100 MHz, 400 mA):

BMC2EY0060AN, FB322513T-600Y-S, and ILBB1210ER600V are direct electrical and mechanical equivalents to EMI1210R-60. All three parts maintain identical impedance, current rating, and DC resistance specifications. Selection among these options depends on packaging format preference (Cut Tape vs. Tape & Reel) and inventory availability. All are Active status products with compliant certifications.

Enhanced Current Rating Alternative (60 Ohm @ 100 MHz, 500 mA):

FB322513T-600Y-S-1 provides identical impedance to the primary part with increased maximum current rating (500 mA vs. 400 mA). This part is suitable for designs requiring margin above the 400 mA specification or in future design iterations with higher current demands. All other electrical and mechanical parameters remain consistent with the primary part.

Impedance Variation Alternatives (52 Ohm @ 100 MHz):

BMC2EY0052AN and FB322513T-520Y-S provide ferrite bead solutions with 52 ohms impedance, representing a parametric equivalent within the ferrite bead product series. These parts are appropriate for applications where impedance specification allows flexibility or where filtering requirements are less stringent than the 60 ohm specification. Current rating and DC resistance specifications remain unchanged.

All substitute parts are certified to RoHS and REACH compliance requirements, supporting regulatory obligations for electronics manufacturing.

Frequently Asked Questions (FAQ)

Q: Can BMC2EY0060AN be used as a direct replacement for EMI1210R-60?

A: Yes. BMC2EY0060AN is a direct equivalent offering identical electrical specifications (60 ohms @ 100 MHz, 400 mA maximum current, 300 mOhm DC resistance) and matching mechanical package dimensions (1210 3225 metric). The primary difference is packaging format (Cut Tape versus Tape & Reel). Both parts meet ROHS3 compliance requirements.

Q: What is the difference between the 60 ohm and 52 ohm ferrite beads?

A: The impedance value determines the frequency-dependent filtering characteristics of the ferrite bead. The 60 ohm specification of EMI1210R-60 provides higher impedance at 100 MHz compared to the 52 ohm alternatives. Selection between 60 and 52 ohm ratings depends on the application's EMI filtering requirement. Both impedance values are within the standard ferrite bead product series and share identical package, current rating, and temperature specifications.

Q: Is FB322513T-600Y-S-1 suitable if my application requires 500 mA?

A: Yes. FB322513T-600Y-S-1 is rated for maximum current of 500 mA, exceeding the 400 mA specification of EMI1210R-60. All other electrical parameters (impedance, DC resistance) and mechanical specifications (package, dimensions, temperature range) are identical or compatible. This part is appropriate for designs requiring current capacity above 400 mA while maintaining equivalent filtering performance.

Q: Are all substitute parts compliant with regulatory requirements?

A: Yes. All listed substitute parts are certified as either ROHS3 Compliant or RoHS Compliant. All parts carry REACH Unaffected status. These certifications ensure compliance with applicable environmental and regulatory standards for electronic component manufacturing and assembly.

Q: What packaging format should I select?

A: EMI1210R-60 and its direct equivalents are supplied in either Tape & Reel (TR) or Cut Tape (CT) format. Tape & Reel packaging is standard for high-volume automated assembly operations. Cut Tape format is suitable for lower-volume production or manual assembly processes. The electrical and mechanical performance is identical between packaging formats; selection depends on assembly line capabilities and order volume requirements.

Q: Can the 1210 package be soldered using standard SMT assembly equipment?

A: Yes. All listed parts feature surface mount configuration in the 1210 (3225 metric) package, a standard footprint compatible with automated surface mount technology (SMT) assembly equipment. Physical dimensions (length, width, height) are identical across all substitute parts, ensuring compatibility with existing PCB designs and reflow soldering processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message