EM6K7T2R Equivalent & Substitute Parts Reference

Part Overview

The EM6K7T2R is a dual N-channel MOSFET array manufactured by Rohm Semiconductor. It falls under the category "Transistors, FETs, MOSFETs" and is supplied in surface mount SOT-563/SOT-666 packages. This device features a drain-to-source voltage of 20V, a continuous drain current of 200mA, and maximum power dissipation of 150mW. The product status is Active, and the device is ROHS3 compliant with unlimited moisture sensitivity. When the exact part is unavailable or specific parameters require close matching, it is necessary to reference substitute models with electrical and mechanical compatibility.

Substiute Parts

EM6K7T2R

Rohm SemiconductorIn Stock: 21437EM6K7T2R Datasheet

Current PartRFQ

NTJD4401NT1G

onsemiIn Stock: 125249NTJD4401NT1G Datasheet

SimilarRFQ

PJX8828_R1_00001

Panjit International Inc.In Stock: 3452PJX8828_R1_00001 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is based strictly on matching the following key parameters: transistor configuration (2 N-Channel/Dual), drain-to-source voltage (Vdss), continuous drain current (Id), Rds(on), gate threshold voltage (Vgs(th)), input capacitance (Ciss), power rating, operating temperature, mounting type, package equivalence, and compliance attributes (RoHS, MSL). Only substitute parts that fully align with these listed parameters and product category are considered. Substitute selection is restricted to electrical and mechanical equivalence based on manufacturer-specified data.

Parameter Comparison

Engineering Selection Recommendations

All listed substitutes (NTJD4401NT1G and PJX8828_R1_00001) feature a product status of Active and are ROHS3 compliant with an unlimited moisture sensitivity level (MSL 1). Regulatory attributes and environmental certifications match or exceed those of EM6K7T2R, supporting use in designated compliant applications. Only parts meeting these product status and certification requirements are addressed in this equivalence list.

Frequently Asked Questions (FAQ)

Q: What determines if a MOSFET can be used as a substitute for EM6K7T2R?
A: Substitution is determined by matching configuration, Vdss, Id, Rds(on), Vgs(th), input capacitance, power, operating temperature, mounting type, package, and RoHS/MSL compliance as specified.

Q: Are the package types directly equivalent among all listed parts?
A: EM6K7T2R and PJX8828_R1_00001 both specify SOT-563/SOT-666 packages. NTJD4401NT1G uses SC-88/SOT-363, which is similar in footprint but requires verification with the PCB layout for compatibility.

Q: Can continuous drain current variations impact substitution?
A: Component selection must observe the stated drain current values. Substitute parts provide equal or higher ratings per manufacturer specification.

Q: Do all substitute parts meet the same environmental and moisture sensitivity standards?
A: All substitutes presented are ROHS3 compliant and have a moisture sensitivity level of 1 (Unlimited), matching the compliance standards of the main part.

Q: Are there differences in gate threshold voltage (Vgs(th)) among the substitutes?
A: The specified Vgs(th) is documented for each part. Selection should reference only the explicit values listed in the table.