ELXT12600 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The ELXT12600 is a 12-position terminal block plug manufactured by Amphenol PCD, designed for free-hanging in-line applications with 270° wire entry orientation. This component is classified as active product status and is RoHS compliant. Alternative models may be required due to inventory constraints, specific wire entry angle requirements, or application-specific electrical ratings.

Substiute Parts

ELXT12600

Amphenol PCDIn Stock: 742ELXT12600 Datasheet

Current PartRFQ

1863259

Phoenix ContactIn Stock: 10531863259 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 1863259 qualifies as a substitute based on the following critical parameters:

• Pitch compatibility: Both parts maintain 0.138" (4.60mm) pitch, ensuring mechanical interchangeability with mating connectors
• Position count: Both feature 12 positions in a single level configuration
• Connector type: Both are plug-type connectors with female sockets
• Termination method: Both use screw-based rising cage clamp termination
• Mounting configuration: Both are free-hanging in-line designs
• Flammability rating: Both meet UL94 V-0 material standards
• Compliance: Both are RoHS compliant

Key difference: Wire entry angle differs (270° vs. 90°), which affects physical installation orientation but does not impact electrical compatibility when properly oriented in the application.

Parameter Comparison

Engineering Selection Recommendations

ELXT12600 (Primary Selection)

• Supports higher current capacity at 12 A UL rating
• Specified operating temperature of 125°C
• Narrower wire gauge range (16-28 AWG) provides tighter specification control
• RoHS compliant with MSL 1 rating

1863259 (Substitute Selection)

• Supports broader wire gauge range (14-30 AWG) for flexible conductor sizing
• ROHS3 compliant with REACH unaffected status
• Higher inventory availability (1024 Pcs vs. 662 Pcs)
• Current rating of 8 A is suitable for applications not requiring the full 12 A capacity
• 90° wire entry orientation may be preferred for space-constrained installations

Selection between these parts should be based on application current requirements, available installation space for wire entry angle, and conductor gauge specifications.

Frequently Asked Questions (FAQ)

Q: Can the 1863259 directly replace the ELXT12600 in all applications? A: Electrical compatibility is maintained for applications requiring 8 A or less at 300 V UL. The primary consideration is wire entry angle orientation (90° vs. 270°), which affects physical installation geometry but not electrical function.

Q: What is the significance of the wire gauge range difference? A: ELXT12600 specifies 16-28 AWG while 1863259 accepts 14-30 AWG. The substitute accommodates a broader range, including larger conductors (14 AWG) and smaller conductors (30 AWG). Verify application wire specifications before substitution.

Q: Are both parts suitable for the same voltage applications? A: Yes. Both parts are rated for 300 V UL, making them electrically equivalent for voltage specifications.

Q: What does the wire entry angle difference mean for installation? A: Wire entry angle (270° vs. 90°) determines the physical direction from which conductors enter the connector. This affects panel layout and cable routing but does not impact electrical performance. Ensure the selected angle accommodates your installation geometry.

Q: Are there compliance differences between these parts? A: Both are RoHS compliant. ELXT12600 is RoHS compliant; 1863259 is ROHS3 compliant with REACH unaffected status, indicating more recent regulatory alignment.

Q: Which part should be selected for high-current applications? A: ELXT12600 with its 12 A UL rating is specified for higher current capacity. Applications requiring sustained currents above 8 A should use ELXT12600.

Q: Does packaging type affect electrical performance? A: No. Packaging (Tray vs. Bulk) affects logistics and handling only, not component function or compatibility.