ELXT065G0 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The ELXT065G0 is a 6-position terminal block plug manufactured by Amphenol PCD, designed for applications requiring screw-based wire termination with 90° wire entry orientation. This component is classified as Active product status with full RoHS compliance and UL certification. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in compatible applications.

Substiute Parts

ELXT065G0

Amphenol PCDIn Stock: 833ELXT065G0 Datasheet

Current PartRFQ

TS06115B0000G

Amphenol AnytekIn Stock: 773TS06115B0000G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELXT065G0 is determined by the following critical parameters:

• Electrical Compatibility: Voltage rating (300 V UL), wire gauge acceptance (16-28 AWG), and contact material composition
• Mechanical Compatibility: 6-position configuration, 0.138" (4.60mm) pitch spacing, female socket type, and free-hanging mounting
• Regulatory Compliance: UL94 V-0 flammability rating, RoHS compliance status, and MSL rating
• Termination Method: Screw-based wire connection with specified torque parameters

The substitute part TS06115B0000G meets the core electrical and mechanical requirements for 6-position, 4.6mm pitch terminal block plug applications. Variations in wire entry orientation (90° vs. 270°), termination mechanism (rising cage clamp vs. leaf spring), and current rating must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both ELXT065G0 and TS06115B0000G maintain Active product status with full regulatory compliance (UL94 V-0, RoHS/ROHS3, MSL 1). Selection between these components depends on application-specific requirements:

The ELXT065G0 supports higher current capacity (12 A vs. 8 A) and higher maximum operating temperature (125°C vs. 115°C), making it suitable for higher-power or elevated-temperature applications. The 90° wire entry orientation accommodates inline connector configurations.

The TS06115B0000G features a 270° wire entry angle with leaf spring termination and wire guard, providing alternative mechanical orientation and wire retention characteristics. The lower operating temperature maximum and reduced current rating require evaluation against application thermal and power demands.

Both components share identical pitch spacing (4.60mm), 6-position configuration, voltage rating (300 V), wire gauge compatibility (16-28 AWG), and flammability certification, establishing baseline interchangeability for standard terminal block applications.

Frequently Asked Questions (FAQ)

Q: Can TS06115B0000G directly replace ELXT065G0 in all applications?

A: Direct replacement requires verification of three factors: wire entry angle compatibility (90° vs. 270°), current load requirements (12 A vs. 8 A maximum), and operating temperature range (125°C vs. 115°C maximum). Applications within the TS06115B0000G specifications may proceed; applications exceeding 8 A or 115°C require the ELXT065G0.

Q: What are the key differences in termination mechanism?

A: ELXT065G0 uses screw-based rising cage clamp termination with 0.25 Nm torque specification. TS06115B0000G employs screw-based leaf spring termination with wire guard and 0.2 Nm torque specification. Both are screw-terminated; the mechanical clamping method differs.

Q: Are both parts RoHS compliant?

A: Yes. ELXT065G0 carries RoHS Compliant certification; TS06115B0000G carries ROHS3 Compliant certification. Both meet current RoHS requirements.

Q: What is the significance of the wire entry angle difference?

A: Wire entry angle (90° vs. 270°) determines physical connector orientation within the assembly. 90° entry (ELXT065G0) supports perpendicular wire approach; 270° entry (TS06115B0000G) supports alternative angular approach. Selection depends on PCB layout and wire routing constraints.

Q: Do both parts accept the same wire gauge range?

A: Yes. Both ELXT065G0 and TS06115B0000G accept 16-28 AWG wire gauge, ensuring wire compatibility across substitution scenarios.

Q: What contact materials are used?

A: ELXT065G0 uses copper alloy contacts; TS06115B0000G uses phosphor bronze contacts. Both materials provide tin mating finish and are suitable for general-purpose terminal block applications.