ELXT02600 Terminal Block Plug Equivalent & Substitute Parts

Part Overview

The ELXT02600 is a 2-position terminal block plug manufactured by Amphenol PCD, featuring female sockets with 0.138" (4.60mm) pitch and 270° free hanging in-line mounting. This component is designed for applications requiring screw-based rising cage clamp termination with rated capacity of 12 A at 300 V UL. The part maintains active product status and is RoHS compliant with MSL 1 rating, indicating broad availability and compliance with current environmental standards. Equivalent and substitute parts are identified to provide procurement flexibility, support supply chain continuity, and accommodate design variations where electrical and mechanical parameters align within acceptable tolerances.

Substiute Parts

ELXT02600

Amphenol PCDIn Stock: 809ELXT02600 Datasheet

Current PartRFQ

TS02315A0000G

Amphenol AnytekIn Stock: 6925TS02315A0000G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELXT02600 is determined by alignment of the following critical parameters:

Mandatory Alignment Parameters:

• Type: Plug with Female Sockets
• Number of Positions: 2
• Termination Style: Screw - Rising Cage Clamp
• Mounting Type: Free Hanging (In-Line)
• Wire Gauge Compatibility: 16-28 AWG
• Voltage Rating: 300 V UL minimum
• Material Flammability: UL94 V-0
• RoHS Compliance Status

Tolerance Parameters:

• Pitch: 0.138" (4.60mm) primary; minor variations acceptable within mechanical envelope constraints
• Plug Wire Entry Angle: 270° primary; alternative angles permissible if mechanical fit is verified
• Current Rating: 12 A minimum required; higher ratings acceptable
• Operating Temperature: 125°C minimum required; higher ratings acceptable

The substitute part TS02315A0000G meets the core functional requirements as a 2-position terminal block plug with female sockets, screw-based rising cage clamp termination, and free hanging in-line mounting. Both parts maintain UL94 V-0 flammability rating, 300 V voltage rating, and RoHS compliance. Differences in pitch (3.81mm vs. 4.60mm), wire entry angle (90° vs. 270°), and current rating (8 A vs. 12 A) represent design trade-offs that require application-level verification.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (ELXT02600): Use as the specified component when design requirements mandate 4.60mm pitch, 270° wire entry orientation, 12 A current capacity, and 125°C maximum operating temperature. This part is active status with established supply chain presence (706 pcs in stock).

Substitute Part (TS02315A0000G): Consider as an alternative only when the following conditions are met:

• Application current requirement does not exceed 8 A
• Application maximum operating temperature does not exceed 115°C
• Mechanical envelope accommodates 3.81mm pitch spacing
• PCB or connector layout can accommodate 90° wire entry angle instead of 270°

Both parts maintain identical electrical safety ratings (300 V, UL94 V-0) and environmental compliance (RoHS, MSL 1). The substitute part offers higher inventory availability (6879 pcs in stock) and ROHS3 certification status. Selection between these parts requires verification that application-specific current, temperature, and spatial constraints are satisfied by the substitute's reduced ratings and different mechanical orientation.

Frequently Asked Questions (FAQ)

Q: Can TS02315A0000G be used as a direct drop-in replacement for ELXT02600?

A: No. While both are 2-position terminal block plugs with identical termination style and mounting type, three parameters differ: pitch (3.81mm vs. 4.60mm), wire entry angle (90° vs. 270°), and current rating (8 A vs. 12 A). Direct substitution requires verification that your application tolerates these differences. Mechanical fit must be confirmed before implementation.

Q: What is the impact of the different pitch specification?

A: Pitch determines the center-to-center spacing between contact positions. The 0.138" (4.60mm) pitch of ELXT02600 versus 0.150" (3.81mm) pitch of TS02315A0000G means the substitute part is physically wider. This affects PCB layout, connector spacing, and mating header compatibility. Verify that your mating connector or header accommodates 3.81mm pitch before selecting the substitute.

Q: Why does the substitute part have a lower current rating?

A: The TS02315A0000G is rated for 8 A at 300 V UL, compared to 12 A for the ELXT02600. This reflects different internal contact geometry and material specifications. Use the substitute only if your application current does not exceed 8 A. Exceeding this rating may result in contact overheating and failure.

Q: Are there temperature limitations with the substitute part?

A: Yes. The TS02315A0000G operates from -40°C to 115°C, while ELXT02600 operates to 125°C. If your application requires sustained operation above 115°C, the substitute is not suitable. Verify your maximum operating temperature requirement before selection.

Q: What does the different wire entry angle mean for installation?

A: Wire entry angle describes the direction wires enter the terminal block. ELXT02600 uses 270° entry (wires approach from the rear), while TS02315A0000G uses 90° entry (wires approach from the side). This affects cable routing, panel layout, and connector accessibility. Confirm your installation geometry accommodates the 90° entry before substitution.

Q: Are both parts RoHS compliant?

A: Yes. ELXT02600 is RoHS Compliant, and TS02315A0000G is ROHS3 Compliant. ROHS3 represents the current regulatory standard. Both parts meet environmental compliance requirements for restricted substance use.

Q: What is the significance of MSL 1 rating for both parts?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life with no special moisture control requirements during storage or handling. Both parts can be stored under standard conditions without desiccant packaging or humidity control, simplifying inventory management.

Q: Which part should I select for new designs?

A: For new designs, select based on your specific application requirements: use ELXT02600 if you need 12 A capacity, 125°C operation, and 270° wire entry; use TS02315A0000G if your application requires only 8 A, operates below 115°C, and accommodates 90° wire entry and 3.81mm pitch. Verify all mechanical and electrical constraints before finalizing the design.