ELVT12600 Terminal Block Plug Equivalent & Substitute Parts

Part Overview

The ELVT12600 is a 12-position terminal block plug manufactured by Amphenol PCD, featuring female sockets with 0.150" (3.81mm) pitch spacing and 270° free-hanging in-line mounting. This component is actively produced and widely used in industrial control, automation, and power distribution applications requiring screw-type wire termination. Equivalent and substitute parts are identified based on matching electrical ratings, mechanical dimensions, and functional specifications to ensure direct interchangeability in circuit designs and equipment assemblies.

Substiute Parts

ELVT12600

Amphenol PCDIn Stock: 1087ELVT12600 Datasheet

Current PartRFQ

1798990000

WeidmüllerIn Stock: 8411798990000 Datasheet

SimilarRFQ

EDZ1700/12

On Shore Technology Inc.In Stock: 841EDZ1700/12 Datasheet

SimilarRFQ

EDZ1710/12

On Shore Technology Inc.In Stock: 1073EDZ1710/12 Datasheet

SimilarRFQ

OSTTS12315A

On-Shore TechnologyIn Stock: 1284OSTTS12315A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELVT12600 are qualified based on the following critical parameters that determine functional interchangeability:

Primary Matching Criteria:

• 12-position configuration with 0.150" (3.81mm) pitch spacing
• Female socket plug type with free-hanging in-line mounting
• Screw-type termination for wire connection
• Wire gauge compatibility: 16-28 AWG
• Voltage rating: 300 V UL minimum
• Operating temperature range that encompasses or exceeds the application requirement
• RoHS compliance status

Acceptable Variations:

• Termination mechanism type (Rising Cage Clamp, Clamping Yoke, or standard Screw)
• Housing material composition (Polyamide variants, Nylon with or without glass fill)
• Contact material (Copper Alloy, Copper Tin Alloy, Brass)
• Torque specification range (0.2–0.4 Nm acceptable)
• Wire strip length tolerance (6–7mm range)
• Color designation (Black or Green)

Non-Negotiable Parameters:

• Position count and pitch must match exactly
• Voltage and current ratings must meet or exceed application requirements
• Mounting configuration must be identical (free-hanging in-line)
• Wire gauge range must accommodate 16-28 AWG

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Direct Equivalent): The 1798990000 (Weidmüller Omnimate BC series) is the most direct substitute for the ELVT12600. Both components share identical position count, pitch, voltage rating, wire gauge compatibility, and UL94 V-0 flammability certification. The Weidmüller part maintains RoHS compliance and operates across a comparable temperature range (-50°C to 120°C). The primary difference is the termination mechanism (Clamping Yoke versus Rising Cage Clamp), which does not affect functional interchangeability. Current rating is slightly lower (10 A versus 12 A UL), which is acceptable for applications not requiring the full 12 A capacity.

Secondary Selection (Compatible Alternatives): The EDZ1700/12 and EDZ1710/12 (On Shore Technology) are functionally compatible substitutes. Both maintain the 12-position, 3.81mm pitch configuration and 300 V UL rating with 16-28 AWG wire gauge support. These parts carry ROHS3 compliance and operate within -30°C to 105°C, which covers most industrial applications. The higher screw torque specification (0.4 Nm) requires operator awareness during installation but does not preclude substitution. Housing material is standard Polyamide/Nylon without glass fill.

Tertiary Selection (Limited Compatibility): The OSTTS12315A (On-Shore Technology) meets core dimensional and electrical requirements but exhibits material composition differences (Brass housing and contact material). This part is suitable for applications where brass construction is acceptable or preferred. Screw torque is lower (0.2 Nm), requiring careful installation technique.

Compliance Considerations: All substitute parts maintain RoHS compliance (either RoHS or ROHS3 status). The ELVT12600 and 1798990000 both carry UL94 V-0 flammability certification, which is the highest fire safety rating. Applications requiring explicit UL94 V-0 certification should prioritize these two options. The On Shore variants do not specify flammability rating in provided data.

Frequently Asked Questions (FAQ)

Q: Can I use the 1798990000 (Weidmüller) as a direct replacement for the ELVT12600?

A: Yes. Both parts are 12-position, 3.81mm pitch terminal block plugs with identical voltage (300 V UL) and wire gauge (16-28 AWG) specifications. The termination mechanism differs (Clamping Yoke versus Rising Cage Clamp), but both are screw-type systems that provide equivalent wire retention. The Weidmüller part has a slightly lower current rating (10 A versus 12 A), which is acceptable unless your application requires the full 12 A capacity.

Q: What is the difference between the EDZ1700/12 and EDZ1710/12?

A: Both On Shore parts are functionally identical in the provided specifications. They share the same 12-position configuration, 3.81mm pitch, 300 V UL rating, and 16-28 AWG wire gauge range. They differ only in series designation (EDZ1700 versus EDZ1710) and base product number, which may reflect manufacturing line or internal catalog organization rather than functional differences.

Q: Are there any temperature limitations I should consider when substituting?

A: The ELVT12600 operates from -40°C to 125°C. The 1798990000 (Weidmüller) covers -50°C to 120°C, which is slightly narrower at the upper end. The On Shore variants (EDZ1700/12, EDZ1710/12, OSTTS12315A) operate from -30°C to 105°C, which is more limited. If your application requires operation above 105°C or below -30°C, the ELVT12600 or 1798990000 are required.

Q: What does the screw torque specification mean, and why do the On Shore parts have higher torque values?

A: Screw torque specifies the tightening force applied during wire termination. The ELVT12600 and 1798990000 specify 0.25 Nm and 0.2-0.25 Nm respectively. The On Shore parts specify 0.4 Nm, which is higher. This reflects different clamp design and material properties. Higher torque does not indicate superior performance; it is simply the correct installation specification for that design. Operators must follow the torque specification for each part to ensure proper wire retention without over-tightening.

Q: Can I mix ELVT12600 and substitute parts in the same equipment?

A: Yes, provided the application does not require all 12 positions to operate at maximum current simultaneously. If your design uses fewer than 12 positions or operates below 10 A per position, any of the listed substitutes are compatible. For applications requiring all 12 positions at 12 A, use only the ELVT12600 or verify that the substitute part's current rating meets your requirement.

Q: Which substitute part should I choose if flammability certification is critical?

A: The 1798990000 (Weidmüller) is the only substitute with explicit UL94 V-0 certification matching the ELVT12600. If UL94 V-0 is a mandatory requirement, this is the appropriate choice. The On Shore variants do not provide flammability rating data in available specifications.

Q: Is the OSTTS12315A suitable for my application?

A: The OSTTS12315A meets core electrical and dimensional requirements (12 positions, 3.81mm pitch, 300 V UL, 16-28 AWG). However, it uses Brass for both housing and contact material, which differs from the Polyamide/Nylon housing of other options. Brass construction may be preferred in certain environments (e.g., high-temperature or corrosive conditions) but is not standard for general industrial applications. Verify that Brass housing is compatible with your equipment design before selection.

Q: What is the difference between RoHS and ROHS3 compliance?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. RoHS (original) and ROHS3 (current revision) both restrict the same hazardous materials. ROHS3 is the current standard. Both are acceptable for new designs. The distinction does not affect interchangeability.