ELVT10600 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The ELVT10600 is a 10-position terminal block plug manufactured by Amphenol PCD, featuring female sockets with 0.150" (3.81mm) pitch spacing and 270° free-hanging in-line mounting. This component is actively produced and stocked with 834 units available. Terminal block plugs of this configuration are essential in industrial control systems, automation equipment, and modular electrical assemblies where reliable screw-terminated connections are required. Substitute parts may be necessary due to supply constraints, regional availability, or specific application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	ELVT10600
Manufacturer	Amphenol PCD
Number of Positions	10
Pitch	0.150" (3.81mm)
Type	Plug, Female Sockets
Termination Style	Screw - Rising Cage Clamp
Mounting Type	Free Hanging (In-Line)
Current Rating (UL)	12 A
Voltage Rating (UL)	300 V
Wire Gauge	16-28 AWG
Operating Temperature	-40°C to 125°C
Housing Material	Polyamide (PA46), Nylon 4/6
RoHS Status	RoHS Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the ELVT10600 is determined by strict alignment of the following critical parameters:

Position Count & Pitch: All substitutes must maintain 10 positions at 0.150" (3.81mm) pitch spacing to ensure mechanical and electrical compatibility with mating connectors.
Connector Type: All substitutes must be plug-type connectors with female sockets to match the intended circuit interface.
Mounting Configuration: All substitutes must support free-hanging in-line mounting without requiring additional hardware or structural modifications.
Termination Method: All substitutes must use screw-based termination to maintain compatibility with existing wiring practices and installation procedures.
Electrical Ratings: All substitutes must meet or exceed the UL voltage rating of 300 V and support wire gauges within the 16-28 AWG range.
Compliance: All substitutes must maintain RoHS compliance and MSL Level 1 rating for storage and handling consistency.

The three qualified substitute parts—1798980000 (Weidmüller), EDZ1700/10 (On Shore Technology Inc.), and OSTTS10315B (On-Shore Technology)—satisfy these core requirements while offering variations in current capacity, temperature range, and termination torque specifications.

Parameter Comparison

Parameter	ELVT10600	1798980000	EDZ1700/10	OSTTS10315B
Manufacturer	Amphenol PCD	Weidmüller	On Shore Technology Inc.	On-Shore Technology
Number of Positions	10	10	10	10
Pitch	0.150" (3.81mm)	0.150" (3.81mm)	0.150" (3.81mm)	0.150" (3.81mm)
Type	Plug, Female Sockets	Plug, Female Sockets	Plug, Female Sockets	Plug, Female Sockets
Termination Style	Screw - Rising Cage Clamp	Screw - Clamping Yoke (Tension Sleeve)	Screw	Screw
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Free Hanging (In-Line)	Free Hanging (In-Line)
Current Rating (UL)	12 A	10 A	—	—
Voltage Rating (UL)	300 V	300 V	300 V	300 V
Wire Gauge	16-28 AWG	16-28 AWG	16-28 AWG	16-28 AWG
Operating Temperature	-40°C to 125°C	-50°C to 120°C	-30°C to 105°C	-40°C to 115°C
Contact Material	Copper Alloy	Copper Alloy	Copper Tin Alloy	Brass
Housing Material	Polyamide (PA46), Nylon 4/6	Polyamide (PA), Nylon, Glass Filled	Polyamide (PA), Nylon	Brass
RoHS Status	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Torque - Screw	0.25 Nm (2.2 Lb-In)	0.2-0.25 Nm (1.7-2.2 Lb-In)	0.4 Nm (4.6 Lb-In)	0.2 Nm (1.7 Lb-In)
Wire Strip Length	6.35mm	7mm	7mm	6-7mm
Inventory Status	834 Pcs New Original In Stock	745 Pcs New Original In Stock	1010 Pcs New Original In Stock	884 Pcs New Original In Stock

Engineering Selection Recommendations

1798980000 (Weidmüller Omnimate BC Series)

This substitute is suitable for applications where the UL current rating of 10 A is sufficient. The part maintains the 300 V UL voltage specification and supports the full 16-28 AWG wire gauge range. Operating temperature range extends to -50°C, providing enhanced low-temperature performance compared to the ELVT10600. The screw torque specification of 0.2-0.25 Nm overlaps with the original part, ensuring compatibility with standard installation procedures. RoHS compliance and MSL Level 1 rating are maintained. Packaging is supplied in bulk format.

EDZ1700/10 (On Shore Technology Inc. EDZ1700 Series)

This substitute meets the 300 V UL voltage requirement and accommodates 16-28 AWG wire gauges. The operating temperature range of -30°C to 105°C is narrower than the ELVT10600, making it suitable for applications within this thermal envelope. The screw torque specification of 0.4 Nm is higher than the original part, requiring adjusted installation procedures. ROHS3 compliance and MSL Level 1 rating are confirmed. Inventory availability is high at 1010 units. This part is appropriate for applications not requiring the full upper temperature range of the ELVT10600.

OSTTS10315B (On-Shore Technology OSTTS Series)

This substitute maintains the 300 V UL voltage rating and 16-28 AWG wire gauge compatibility. The operating temperature range of -40°C to 115°C aligns closely with the ELVT10600 specification. The screw torque specification of 0.2 Nm is lower than the original part, requiring careful installation to avoid under-torquing. ROHS3 compliance and MSL Level 1 rating are maintained. Inventory availability is 884 units. This part is suitable for applications requiring thermal performance similar to the original component.

All three substitutes are actively produced and maintain regulatory compliance. Selection should be based on specific application requirements regarding current capacity, operating temperature range, and installation torque procedures.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with a lower UL current rating than the ELVT10600?

A: Substitution with a lower current rating is permissible only if your application's actual current draw does not exceed the substitute part's rating. The ELVT10600 is rated for 12 A (UL), while the 1798980000 is rated for 10 A (UL). Circuit design must ensure the substitute is not operated beyond its specified current limit.

Q: Are all substitute parts compatible with the same mating connectors as the ELVT10600?

A: Yes. All substitute parts maintain the 10-position configuration at 0.150" (3.81mm) pitch with female socket type and free-hanging in-line mounting. Mechanical and electrical mating with existing connector systems is ensured.

Q: What is the significance of the different screw torque specifications?

A: Screw torque specifications define the installation procedure. The ELVT10600 requires 0.25 Nm, while substitutes range from 0.2 Nm to 0.4 Nm. Installation personnel must apply the torque value specified for the selected part to ensure proper contact pressure and electrical performance. Over-torquing or under-torquing can result in connection failure.

Q: Do all substitute parts meet the same compliance standards as the ELVT10600?

A: All substitute parts are RoHS compliant and maintain MSL Level 1 rating. The ELVT10600 is RoHS Compliant, while EDZ1700/10 and OSTTS10315B are ROHS3 Compliant. Both standards satisfy RoHS requirements. All parts carry EAR99 ECCN and 8536.90.4000 HTSUS classification.

Q: Which substitute part offers the widest operating temperature range?

A: The 1798980000 (Weidmüller) extends to -50°C at the lower end, providing the widest low-temperature capability. The ELVT10600 and OSTTS10315B both support -40°C minimum. At the upper end, the ELVT10600 supports 125°C, which is higher than all substitutes.

Q: Are there packaging differences between the main part and substitutes?

A: Yes. The ELVT10600 is supplied in Tray packaging, while all three substitutes are supplied in Bulk packaging. Bulk packaging may require different handling and storage procedures compared to tray format.

Q: Can I mix ELVT10600 and substitute parts in the same assembly?

A: Yes, provided each connector is installed according to its specific torque specification and the application's electrical requirements do not exceed any individual part's current or voltage rating. Mixed installations require clear documentation of part numbers and installation procedures to prevent assembly errors.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message