ELVT05600 Terminal Block Plug Equivalent & Substitute Parts

Part Overview

The ELVT05600 is a 5-position terminal block plug manufactured by Amphenol PCD, featuring female sockets with 0.150" (3.81mm) pitch spacing and 270° free hanging in-line mounting. This component is classified as Active product status and is designed for applications requiring screw-type rising cage clamp termination with rated capacity of 12 A at 300 V UL. Substitute parts become necessary when addressing inventory constraints, regional availability, or specific compliance requirements across manufacturing environments.

Substiute Parts

ELVT05600

Amphenol PCDIn Stock: 1010ELVT05600 Datasheet

Current PartRFQ

EDZ1700/5

On Shore Technology Inc.In Stock: 1084EDZ1700/5 Datasheet

SimilarRFQ

EDZ1710/5

On Shore Technology Inc.In Stock: 910EDZ1710/5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELVT05600 is determined by strict alignment of the following critical parameters:

Core Compatibility Parameters:

• Number of positions: 5
• Pitch spacing: 0.150" (3.81mm)
• Type: Plug with female sockets
• Mounting configuration: Free hanging in-line
• Termination method: Screw-type
• Voltage rating: 300 V UL minimum
• Wire gauge compatibility: 16-28 AWG

The substitute parts EDZ1700/5 and EDZ1710/5, both manufactured by On Shore Technology Inc., meet these core electrical and mechanical requirements. Both maintain identical position count, pitch spacing, socket configuration, and mounting orientation. Both support screw termination with 300 V UL voltage rating and 16-28 AWG wire gauge compatibility. Differences in operating temperature range, torque specification, and wire strip length do not preclude substitution when these parameters fall within acceptable application tolerances.

Parameter Comparison

Engineering Selection Recommendations

Both EDZ1700/5 and EDZ1710/5 are qualified substitutes for the ELVT05600 based on alignment of core electrical and mechanical parameters. All three parts maintain Active product status, ensuring continued manufacturing support and availability.

Compliance Considerations:

The ELVT05600 carries RoHS Compliant certification. Both substitute parts carry ROHS3 Compliant certification, which represents an updated regulatory framework and maintains material restriction compliance. The EDZ1700/5 and EDZ1710/5 additionally carry REACH Unaffected status, providing expanded environmental compliance documentation.

Operational Parameter Differences:

The ELVT05600 specifies a maximum operating temperature of 125°C, while both On Shore Technology substitutes specify -30°C to 105°C. Applications requiring sustained operation above 105°C should retain the ELVT05600. Applications operating within the -30°C to 105°C range are compatible with either substitute.

The ELVT05600 specifies 0.25 Nm screw torque, while substitutes specify 0.4 Nm. Wire strip length differs by 0.65mm (ELVT05600 at 6.35mm versus substitutes at 7mm). These dimensional and torque variations require verification against specific assembly procedures and equipment capabilities.

Inventory and Packaging:

ELVT05600 is supplied in Tray packaging with 953 units in stock. EDZ1700/5 and EDZ1710/5 are supplied in Bulk packaging with 1020 and 819 units respectively. Packaging format may influence procurement logistics and handling procedures.

Frequently Asked Questions (FAQ)

Q: Can EDZ1700/5 and EDZ1710/5 be used interchangeably with ELVT05600?

A: Both On Shore Technology parts meet the core electrical and mechanical specifications of the ELVT05600, including 5-position configuration, 0.150" pitch, 300 V rating, and 16-28 AWG wire gauge compatibility. Substitution is valid when application operating temperature remains within -30°C to 105°C and screw torque specification of 0.4 Nm is compatible with assembly equipment.

Q: What are the key differences between the substitute parts?

A: EDZ1700/5 and EDZ1710/5 are functionally equivalent. Both are manufactured by On Shore Technology Inc., share identical electrical ratings, pitch spacing, position count, and wire gauge specifications. Both carry ROHS3 Compliant and REACH Unaffected certifications. Selection between these two parts should be based on inventory availability and packaging requirements (Bulk format for both).

Q: Does the operating temperature difference affect substitution suitability?

A: The ELVT05600 operates to 125°C maximum, while EDZ1700/5 and EDZ1710/5 operate to 105°C maximum. Applications requiring sustained operation above 105°C must use the ELVT05600. Applications within the -30°C to 105°C range are compatible with either substitute part.

Q: Are there compliance differences between the main part and substitutes?

A: The ELVT05600 is RoHS Compliant. Both EDZ1700/5 and EDZ1710/5 are ROHS3 Compliant, representing updated regulatory compliance. The On Shore Technology parts additionally carry REACH Unaffected status. All three parts are classified as Active product status with ongoing manufacturing support.

Q: What packaging formats are available?

A: ELVT05600 is supplied in Tray packaging. EDZ1700/5 and EDZ1710/5 are supplied in Bulk packaging. Packaging selection may influence procurement procedures, storage requirements, and handling logistics.

Q: How do screw torque specifications differ?

A: ELVT05600 specifies 0.25 Nm (2.2 Lb-In) screw torque. EDZ1700/5 and EDZ1710/5 specify 0.4 Nm (4.6 Lb-In). Assembly equipment and procedures must accommodate the higher torque specification of the substitute parts.

Q: Are wire strip length differences significant?

A: ELVT05600 specifies 6.35mm wire strip length. EDZ1700/5 and EDZ1710/5 specify 7mm. This 0.65mm difference should be evaluated against specific assembly procedures and connector housing clearances.