ELVT02600 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The ELVT02600 is a 2-position terminal block plug manufactured by Amphenol PCD, designed for inline free-hanging applications with female sockets at 0.150" (3.81mm) pitch. This component is actively produced and stocked with 1096 units available. Terminal block plugs serve as connectors for power distribution and signal routing in industrial control systems, automation equipment, and modular electrical assemblies. Substitute parts are identified when equivalent electrical ratings, mechanical dimensions, and termination methods align with the original specification, enabling component interchangeability for procurement flexibility and supply chain continuity.

Substiute Parts

ELVT02600

Amphenol PCDIn Stock: 1138ELVT02600 Datasheet

Current PartRFQ

EDZ1700/2

On Shore Technology Inc.In Stock: 1032EDZ1700/2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELVT02600 is determined by the following critical parameters:

Electrical Compatibility: Voltage rating must meet or exceed 300 V UL. Current rating must support 12 A UL minimum. Wire gauge acceptance range must include 16-28 AWG.

Mechanical Compatibility: Pitch must be 0.150" (3.81mm). Configuration must be 2-position, single-level. Mounting type must be free-hanging (in-line). Connector type must be plug with female sockets.

Termination Compatibility: Termination method must be screw-based to ensure field serviceability and compatibility with existing installation practices.

Environmental & Compliance: Operating temperature range must support continuous operation at 125°C or higher. RoHS compliance status must be active (RoHS Compliant or ROHS3 Compliant). Moisture sensitivity level must be 1 (Unlimited).

The EDZ1700/2 manufactured by On Shore Technology Inc. meets these substitution criteria across all critical parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection - ELVT02600: Recommended for applications requiring continuous operation at elevated temperatures up to 125°C. Amphenol PCD maintains active production status with 1096 units in stock. RoHS Compliant certification applies. Screw termination with rising cage clamp design provides secure wire retention.

Substitute Selection - EDZ1700/2: Suitable for applications with maximum operating temperatures not exceeding 105°C. On Shore Technology Inc. maintains active production with 923 units available. ROHS3 Compliant certification applies. Screw termination method ensures compatibility with existing installation procedures. Standard polyamide housing and copper tin alloy contacts meet electrical requirements at 300 V and 12 A ratings.

Selection Criteria: Choose EDZ1700/2 only when application thermal environment does not exceed 105°C continuous operation. Both parts share identical pitch, position count, voltage rating, current rating, and wire gauge specifications. Both maintain MSL 1 rating and EAR99 export classification.

Frequently Asked Questions (FAQ)

Q: Can EDZ1700/2 be used as a direct replacement for ELVT02600 in all applications?

A: EDZ1700/2 is mechanically and electrically compatible for applications operating at or below 105°C. The ELVT02600 is rated to 125°C. If your application requires sustained operation above 105°C, the ELVT02600 is the appropriate choice. Both parts accept 16-28 AWG wire and support 12 A at 300 V.

Q: Are the screw termination methods between these parts interchangeable?

A: Both parts use screw-based termination. The ELVT02600 features a rising cage clamp design, while the EDZ1700/2 uses standard screw termination. Both methods provide secure wire retention and are field-serviceable. Installation procedures remain consistent.

Q: What is the significance of the pitch specification?

A: Pitch (0.150" or 3.81mm) defines the center-to-center spacing between contact positions. Both parts share identical pitch, ensuring mechanical compatibility with mating connectors and PCB layouts designed for this spacing.

Q: Do both parts meet current environmental compliance standards?

A: Yes. ELVT02600 is RoHS Compliant. EDZ1700/2 is ROHS3 Compliant. Both maintain MSL 1 (Unlimited) moisture sensitivity rating and EAR99 export classification. Both are suitable for regulated industrial applications.

Q: What packaging differences exist between these parts?

A: ELVT02600 is supplied in Tray packaging. EDZ1700/2 is supplied in Bulk packaging. Packaging format does not affect electrical or mechanical performance.

Q: How do the contact materials differ?

A: ELVT02600 uses Copper Alloy contacts. EDZ1700/2 uses Copper Tin Alloy contacts. Both materials provide equivalent electrical conductivity and corrosion resistance for the specified voltage and current ratings.