ELVT02500 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The ELVT02500 is a 2-position terminal block plug manufactured by Amphenol PCD, designed for applications requiring screw-terminated electrical connections with 0.150" (3.81mm) pitch spacing. This component features female sockets with 90° free-hanging in-line orientation and is rated for 12 A at 300 V (UL). The part is currently active in production with 1006 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this terminal block category, enabling component interchangeability in compatible applications.

Substiute Parts

ELVT02500

Amphenol PCDIn Stock: 1111ELVT02500 Datasheet

Current PartRFQ

1826979

Phoenix ContactIn Stock: 30531826979 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELVT02500 is determined by the following critical parameters:

• Pitch spacing: 0.150" (3.81mm) — must match exactly for mechanical compatibility
• Number of positions: 2 positions — connector footprint requirement
• Type: Plug with female sockets — functional interface requirement
• Termination style: Screw-based rising cage clamp — installation and retention method
• Electrical ratings: Current and voltage must meet or exceed UL specifications (12 A, 300 V minimum)
• Wire gauge compatibility: Must accommodate 16-28 AWG range or broader
• Flammability rating: UL94 V-0 compliance required for safety-critical applications
• RoHS compliance: Required for regulatory conformance

The substitute part 1826979 (Phoenix Contact COMBICON MCVW series) qualifies as an equivalent based on matching pitch, position count, termination method, and compliance certifications. Differences in wire entry angle (270° vs. 90°) and current rating (8 A vs. 12 A) represent design trade-offs that must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the ELVT02500 and 1826979 maintain active product status and meet UL94 V-0 flammability requirements, confirming suitability for applications requiring flame-resistant terminal block solutions. Both parts are RoHS compliant (ELVT02500: RoHS Compliant; 1826979: ROHS3 Compliant), satisfying regulatory requirements for restricted substance elimination.

The primary distinction between these parts is the current rating differential: the ELVT02500 is rated for 12 A (UL), while the 1826979 is rated for 8 A (UL). Applications requiring current levels between 8 A and 12 A must use the ELVT02500. Applications operating at 8 A or below may use either part.

Wire entry angle differs between the two parts (90° for ELVT02500 vs. 270° for 1826979). This geometric difference affects physical installation orientation and must align with the mechanical layout of the target application. The wire gauge range for 1826979 (14-30 AWG) is broader than ELVT02500 (16-28 AWG), providing additional flexibility for wire size accommodation.

Frequently Asked Questions (FAQ)

Q: Can the 1826979 directly replace the ELVT02500 in all applications?

A: Direct replacement is possible only when the application current requirement does not exceed 8 A (the lower rating of the 1826979). The 90° vs. 270° wire entry angle difference must also be compatible with the physical installation geometry. If the application requires 12 A capacity or mandates 90° wire entry, the ELVT02500 is the required choice.

Q: What does the wire entry angle (90° vs. 270°) mean for installation?

A: Wire entry angle defines the direction from which conductors enter the terminal block connector. A 90° entry means wires approach perpendicular to the connector body, while 270° entry means wires approach from the opposite direction. The correct angle must match the cable routing path in the target assembly.

Q: Are both parts suitable for high-temperature applications?

A: The ELVT02500 specifies an operating temperature of 125°C. The 1826979 does not provide an operating temperature specification in the available data. For applications requiring confirmed high-temperature operation, the ELVT02500 is the documented choice.

Q: What is the difference between RoHS Compliant and ROHS3 Compliant?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the current version of the directive. Both parts meet the regulatory requirement for restricted substance elimination and are acceptable for applications with RoHS mandates.

Q: Does the broader wire gauge range (14-30 AWG) of the 1826979 make it more versatile?

A: The 1826979 accommodates wire sizes from 14 AWG to 30 AWG, compared to the ELVT02500 range of 16-28 AWG. This broader range provides flexibility for applications using larger (14-15 AWG) or smaller (29-30 AWG) conductors. However, the application must still satisfy the 8 A current limit of the 1826979.

Q: What packaging difference exists between these parts?

A: The ELVT02500 is supplied in Tray packaging, while the 1826979 is supplied in Bulk packaging. Packaging affects handling, storage, and quantity per container but does not impact electrical or mechanical performance.