ELSW-F71M1-0CPHS-C3000 LED Equivalent & Substitute Parts

Part Overview

The ELSW-F71M1-0CPHS-C3000 is a warm white 3000K surface mount LED manufactured by Everlight Electronics Co Ltd, part of the SHWO series. This component operates at 3.25V forward voltage with a 350mA test current, delivering 70 lumens at 25°C and 61 lumens at 85°C. The device features a 110° viewing angle in a 1414 (3535 Metric) package footprint measuring 3.50mm × 3.50mm with a maximum seated height of 2.13mm.

The product is currently active and RoHS3 compliant with MSL 1 rating. Substitute parts are identified when mechanical compatibility (package type, dimensions, mounting method) and electrical operating parameters (forward voltage, test current, maximum current) align with application requirements, while color temperature and flux output may differ based on specific design needs.

Substiute Parts

ELSW-F71M1-0CPHS-C3000

Everlight Electronics Co LtdIn Stock: 943ELSW-F71M1-0CPHS-C3000 Datasheet

Current PartRFQ

XPLAWT-00-0000-000BV30E3

CreeLED, Inc.In Stock: 1206XPLAWT-00-0000-000BV30E3 Datasheet

SimilarRFQ

XPLAWT-00-0000-000BV40E3

CreeLED, Inc.In Stock: 910XPLAWT-00-0000-000BV40E3 Datasheet

SimilarRFQ

XTEAWT-00-0000-000000HE2

CreeLED, Inc.In Stock: 1113XTEAWT-00-0000-000000HE2 Datasheet

SimilarRFQ

XTEAWT-00-0000-00000BGE2

CreeLED, Inc.In Stock: 1000011XTEAWT-00-0000-00000BGE2 Datasheet

SimilarRFQ

XTEAWT-00-0000-00000HGE3

CreeLED, Inc.In Stock: 1427XTEAWT-00-0000-00000HGE3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELSW-F71M1-0CPHS-C3000 are identified based on strict mechanical and electrical compatibility criteria:

Mechanical Compatibility Requirements:

• Package / Case: 1414 (3535 Metric)
• Mounting Type: Surface Mount
• Size / Dimension: Approximately 3.45mm – 3.50mm (length and width)
• Height - Seated (Max): Within acceptable PCB assembly clearance (2.13mm – 2.81mm range)

Electrical Compatibility Requirements:

• Voltage - Forward (Vf) (Typ): 2.85V – 3.25V range
• Current - Test: 350mA – 1.05A (devices operating at test current within or near 350mA are primary candidates)
• Current - Max: Minimum 600mA capability
• Mounting Type: Surface Mount only

Substitution Logic: The five substitute parts listed (XPLAWT-00-0000-000BV30E3, XPLAWT-00-0000-000BV40E3, XTEAWT-00-0000-000000HE2, XTEAWT-00-0000-00000BGE2, XTEAWT-00-0000-00000HGE3) all meet the mechanical footprint and electrical operating envelope requirements. These parts share the same 1414 (3535 Metric) package, surface mount configuration, and forward voltage compatibility. However, they differ in color temperature (5000K or 5700K versus 3000K warm white), flux output, and thermal characteristics. Selection among substitutes depends on whether the application can tolerate cool white color temperature and higher luminous output.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitution Candidates (350mA Test Current):

The XTEAWT series parts (XTEAWT-00-0000-000000HE2, XTEAWT-00-0000-00000BGE2, XTEAWT-00-0000-00000HGE3) operate at the same 350mA test current as the ELSW-F71M1-0CPHS-C3000, making them the most direct electrical substitutes. These devices feature:

• Forward voltage of 2.85V (0.40V lower than the main part)
• Maximum current of 1.5A (2.5× the main part's 600mA maximum)
• Thermal resistance of 5°C/W (half the main part's 10°C/W)
• Seated height of 2.54mm (within acceptable PCB assembly tolerance)

All three XTEAWT parts are RoHS compliant and active products. XTEAWT-00-0000-00000HGE3 offers CRI 80 (higher than the main part's CRI 75) with 5000K color temperature. XTEAWT-00-0000-000000HE2 provides CRI data not specified for the other XT-E variant. XTEAWT-00-0000-00000BGE2 is available in Cut Tape & Digi-Reel® packaging with significantly higher inventory (1,000,000 pcs).

Secondary Substitution Candidates (1.05A Test Current):

The XPLAWT series parts (XPLAWT-00-0000-000BV30E3, XPLAWT-00-0000-000BV40E3) operate at 1.05A test current, requiring circuit redesign for current limiting. These XLamp® XP-L devices deliver substantially higher flux output (430lm – 450lm at 85°C versus 61lm for the main part) and superior efficiency (139 – 145 lm/W). They feature:

• Forward voltage of 2.95V (0.30V lower than the main part)
• Maximum current of 3A
• Thermal resistance of 2.5°C/W (superior thermal performance)
• Seated height of 2.81mm (acceptable for most PCB designs)

Both XPLAWT parts are RoHS compliant and active products with 5000K color temperature and CRI 70.

Compliance and Regulatory Status:

All substitute parts maintain RoHS compliance. The main part is RoHS3 compliant; all substitutes are RoHS compliant. All parts carry EAR99 ECCN classification and 8541.41.0000 HTSUS code. The main part's MSL 1 rating (unlimited moisture sensitivity) is matched or exceeded by substitute parts' environmental specifications.

Selection Criteria Summary:

• For direct 350mA current replacement: Select XTEAWT-00-0000-00000HGE3 (CRI 80, 5000K) or XTEAWT-00-0000-00000BGE2 (CRI 70, 5700K, high inventory)
• For higher luminous output applications: Select XPLAWT-00-0000-000BV40E3 (450lm, 145 lm/W) or XPLAWT-00-0000-000BV30E3 (430lm, 139 lm/W) with circuit current limiting redesign
• For warm white color temperature requirement: The ELSW-F71M1-0CPHS-C3000 has no direct warm white substitute; all listed alternatives are cool white (5000K or 5700K)

Frequently Asked Questions (FAQ)

Q: Can XPLAWT-00-0000-000BV30E3 or XPLAWT-00-0000-000BV40E3 be used as direct drop-in replacements?

A: No. These parts operate at 1.05A test current versus 350mA for the ELSW-F71M1-0CPHS-C3000. Direct substitution requires circuit redesign to limit current to 350mA or acceptance of higher operating current. The forward voltage is also 0.30V lower (2.95V versus 3.25V), affecting voltage divider calculations in current-limiting circuits.

Q: Are the XTEAWT parts true drop-in replacements?

A: The XTEAWT-00-0000-000000HE2, XTEAWT-00-0000-00000BGE2, and XTEAWT-00-0000-00000HGE3 share the same 350mA test current and 1414 (3535 Metric) package footprint. Mechanical and electrical compatibility is confirmed. However, forward voltage is 0.40V lower (2.85V versus 3.25V), and color temperature differs (5000K or 5700K versus 3000K warm white). Circuit validation is required for voltage-sensitive applications.

Q: What is the impact of different forward voltages on circuit design?

A: Forward voltage differences affect series resistor calculations in current-limiting circuits and voltage drop across the LED in constant-current driver designs. The XTEAWT parts operate at 2.85V (0.40V lower) and XPLAWT parts at 2.95V (0.30V lower) compared to the main part's 3.25V. In a 5V supply circuit, this results in approximately 0.40V additional voltage across the current-limiting resistor for XTEAWT substitutes, increasing power dissipation by approximately 14% at 350mA.

Q: Can I use XTEAWT-00-0000-00000HGE3 if warm white color is required?

A: No. XTEAWT-00-0000-00000HGE3 operates at 5000K (cool white), not 3000K (warm white). The ELSW-F71M1-0CPHS-C3000 is the only warm white option among the listed parts. If warm white is mandatory, no substitute from this list is suitable.

Q: What are the thermal implications of substituting with XPLAWT parts?

A: XPLAWT parts feature thermal resistance of 2.5°C/W versus 10°C/W for the main part, representing a 75% improvement in thermal performance. At equivalent power dissipation, junction temperature rise is reduced proportionally. However, XPLAWT parts operate at higher current (1.05A test current), resulting in higher absolute power dissipation (3.1W at test current versus 1.14W for the main part at 350mA), which may offset the thermal resistance advantage depending on circuit design.

Q: Are there packaging differences between substitutes?

A: Yes. The main part is supplied in Cut Tape (CT) packaging. XTEAWT-00-0000-00000BGE2 is available in Cut Tape (CT) & Digi-Reel® packaging. XTEAWT-00-0000-000000HE2 and XTEAWT-00-0000-00000HGE3 are supplied in Tape & Reel (TR). XPLAWT parts are supplied in Tape & Reel (TR). Packaging selection affects handling, storage, and automated assembly compatibility.

Q: What is the CRI difference impact?

A: The main part has CRI 75. XTEAWT-00-0000-00000HGE3 offers CRI 80 (5-point improvement), while XPLAWT and XTEAWT-00-0000-00000BGE2 parts have CRI 70 (5-point reduction). CRI measures color rendering accuracy; higher CRI indicates more natural color reproduction. For applications requiring accurate color representation (retail, photography), CRI 80 is preferred. For general illumination, CRI 70 is acceptable.

Q: Which substitute has the best inventory availability?

A: XTEAWT-00-0000-00000BGE2 has 1,000,000 pcs in stock, significantly exceeding other options. XTEAWT-00-0000-00000HGE3 has 1,366 pcs, XPLAWT-00-0000-000BV40E3 has 879 pcs, XTEAWT-00-0000-000000HE2 has 1,044 pcs, and XPLAWT-00-0000-000BV30E3 has 1,100 pcs. The main part (ELSW-F71M1-0CPHS-C3000) has 856 pcs available.