ELM 7-7MM LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 7-7MM is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 3mm LED cavity and 2-lead configuration. This component is constructed from black PVC material with a length of 0.276" (7.00mm). The part maintains Active product status and is RoHS3 compliant with MSL Level 1 rating, indicating unlimited moisture sensitivity tolerance.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

ELM 7-7MM

Bivar Inc.In Stock: 798ELM 7-7MM Datasheet

Current PartRFQ

ELM 2-285

Bivar Inc.In Stock: 1981ELM 2-285 Datasheet

Parametric EquivalentRFQ

H-101C

Bivar Inc.In Stock: 22198H-101C Datasheet

Parametric EquivalentRFQ

H-101C-1

Bivar Inc.In Stock: 12044H-101C-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 7-7MM are determined by alignment of the following critical parameters:

Primary Compatibility Criteria:

• LED Type: T1 (all substitutes maintain T1 specification)
• LED Cavity Size: 3mm (all substitutes accommodate 3mm LED components)
• Lead Configuration: 2-Lead (all substitutes support 2-lead LED packages)
• Color: Black (all substitutes are black)
• RoHS Status: ROHS3 Compliant (all substitutes meet ROHS3 requirement)
• MSL Rating: 1 (Unlimited) (all substitutes maintain MSL Level 1)
• Manufacturer: Bivar Inc. (all substitutes from same manufacturer)

Secondary Variation Parameter:

• Length: Substitutes vary between 0.276" (7.00mm) and 0.285" (7.24mm)
• Material: Substitutes available in PVC or Nylon construction

The length variation of 0.009" (0.24mm) and material composition differences represent the allowable mechanical tolerances within the T1 3mm 2-lead LED standoff category. These variations do not affect electrical performance or functional compatibility in standard LED mounting applications.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain Active product status and full ROHS3 compliance, ensuring regulatory alignment with the ELM 7-7MM. Selection between substitute options is determined by application-specific mechanical requirements:

ELM 2-285: Maintains PVC material composition identical to the main part. Length increases by 0.009" (0.24mm) relative to ELM 7-7MM. Suitable for applications where material consistency with the original specification is required.

H-101C and H-101C-1: Both utilize Nylon material construction with identical length specification of 0.285" (7.24mm). Nylon material provides enhanced mechanical durability compared to PVC. H-101C and H-101C-1 are functionally equivalent with identical electrical and mechanical parameters; selection between these variants is determined by inventory availability and procurement requirements.

All substitutes support identical LED type (T1), cavity size (3mm), and lead configuration (2-lead), ensuring direct functional replacement without circuit redesign.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-285 directly replace ELM 7-7MM in existing designs?

A: Yes. ELM 2-285 maintains identical LED type (T1), cavity size (3mm), lead configuration (2-lead), color (black), and material (PVC). The length difference of 0.009" (0.24mm) falls within standard mechanical tolerances for LED standoff applications and does not affect electrical performance or functional compatibility.

Q: What is the material difference between ELM 7-7MM and H-101C?

A: ELM 7-7MM is constructed from PVC material, while H-101C is constructed from Nylon. Both materials are black and support identical T1 3mm 2-lead LED specifications. Nylon provides enhanced mechanical durability. Material selection depends on application-specific environmental and mechanical stress requirements.

Q: Are H-101C and H-101C-1 interchangeable?

A: Yes. H-101C and H-101C-1 are functionally equivalent with identical electrical and mechanical parameters, including T1 LED type, 3mm cavity size, 2-lead configuration, 0.285" (7.24mm) length, black Nylon material, and all compliance certifications. Selection between these parts is determined by inventory availability and procurement logistics.

Q: Do all substitute parts meet the same compliance requirements as ELM 7-7MM?

A: Yes. All substitute parts (ELM 2-285, H-101C, H-101C-1) are ROHS3 compliant, carry MSL Level 1 rating, and share identical ECCN (EAR99) and HTSUS (3926.90.9985) classifications. Regulatory compliance is maintained across all substitutes.

Q: What packaging format is used for all parts in this substitution group?

A: All parts in this group are supplied in Bag packaging format, ensuring consistent handling and storage requirements across the substitution family.