ELM 7-385 Equivalent & Substitute Parts Reference

Part Overview

The ELM 7-385 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.385" (9.78mm) length. This component is constructed from black PVC material and accommodates 3mm LED packages with 2-lead configurations. The part maintains Active product status and is ROHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity protection.

Substitute parts are identified when equivalent functional performance can be achieved through alternative designs that maintain compatibility with the same LED package type, mounting orientation, and electrical lead configuration while operating within acceptable dimensional tolerances for the application.

Substiute Parts

ELM 7-385

Bivar Inc.In Stock: 750ELM 7-385 Datasheet

Current PartRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 7-385 is determined by the following critical parameters:

Primary Compatibility Criteria:

• LED Type: T1 (fixed requirement)
• LED Package Size: 3MM (fixed requirement)
• Lead Configuration: 2LD (fixed requirement)
• Mounting Orientation: Vertical (fixed requirement)
• Color: Black (fixed requirement)
• Material: PVC or equivalent mechanical material
• Length: Within acceptable tolerance range (0.380" to 0.390")

Compliance Requirements:

• RoHS3 Compliant status
• MSL 1 rating
• Active product status

The identified substitutes maintain all primary compatibility criteria while operating within the specified dimensional tolerance for standoff length. Material composition may vary between PVC and Nylon while preserving mechanical and electrical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

ELM 5-390 Selection Criteria: The ELM 5-390 operates as a direct parametric equivalent with identical material composition (PVC) and all primary compatibility parameters. The length differential of 0.005" (0.13mm) falls within standard mechanical tolerance ranges for LED standoff applications. This substitute maintains equivalent RoHS3 compliance and MSL 1 rating with Active product status. Selection is appropriate when ELM 7-385 availability is constrained and dimensional tolerance of ±0.005" is acceptable within the application circuit board layout.

H-201C Selection Criteria: The H-201C provides substitution through material variation (Nylon vs. PVC) while maintaining all electrical and mechanical compatibility parameters. The length differential of 0.005" (0.13mm) remains within acceptable tolerance. This substitute maintains equivalent RoHS3 compliance and MSL 1 rating with Active product status. Selection is appropriate when material flexibility exists in the application design and Nylon mechanical properties are compatible with the operating environment.

All three parts maintain identical LED package accommodation, lead configuration, and mounting orientation specifications. Selection between alternatives is determined by material preference, dimensional tolerance requirements, and component availability.

Frequently Asked Questions (FAQ)

Q: Can ELM 5-390 be used as a direct replacement for ELM 7-385?

A: Yes. The ELM 5-390 maintains identical LED type (T1), package size (3MM), lead configuration (2LD), mounting orientation (vertical), and color (black). The length difference of 0.005" (0.13mm) is within standard mechanical tolerance for LED standoff applications. Both parts are ROHS3 compliant with MSL 1 rating and Active product status.

Q: What is the material difference between ELM 7-385 and H-201C?

A: ELM 7-385 uses PVC material while H-201C uses Nylon. Both materials provide equivalent mechanical support for T1 LED packages and maintain the same electrical performance characteristics. Material selection depends on application-specific environmental requirements and mechanical property compatibility.

Q: Are all three parts dimensionally interchangeable?

A: The three parts operate within a 0.010" (0.25mm) length range (0.380" to 0.390"). This variation is within standard mechanical tolerance for LED standoff applications. Verify that your specific application circuit board layout and LED seating depth accommodate this tolerance range before selection.

Q: Do all substitute parts maintain the same compliance certifications?

A: Yes. ELM 7-385, ELM 5-390, and H-201C all maintain ROHS3 compliance, MSL 1 rating, and Active product status. All parts are manufactured by Bivar Inc. and share identical ECCN (EAR99) and HTSUS (3926.90.9985) classifications.

Q: What determines whether a part qualifies as a substitute for ELM 7-385?

A: Substitution eligibility requires matching LED type (T1), LED package size (3MM), lead configuration (2LD), mounting orientation (vertical), and color (black). Length must fall within the 0.380" to 0.390" range. Material composition (PVC or Nylon) and series designation may vary. All parts must maintain ROHS3 compliance and MSL 1 rating.

Q: Can I use H-201C if my application requires PVC material specifically?

A: No. H-201C is constructed from Nylon material. If PVC material is a design requirement, use ELM 7-385 or ELM 5-390, both of which are PVC-based standoffs.