ELM 7-310 Equivalent & Substitute Parts

Part Overview

The ELM 7-310 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.310" (7.87mm) length. This component is constructed from black PVC material and accommodates standard T1 LED packages with 2-lead configuration. The part maintains Active product status and is RoHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity tolerance.

Substitute parts are identified when equivalent functional performance can be achieved through alternative Bivar Inc. standoff models that maintain compatibility with T1 LED packages while operating within acceptable dimensional and material specifications.

Substiute Parts

ELM 7-310

Bivar Inc.In Stock: 729ELM 7-310 Datasheet

Current PartRFQ

ELM 2-315

Bivar Inc.In Stock: 7579ELM 2-315 Datasheet

Parametric EquivalentRFQ

ELM 2-320

Bivar Inc.In Stock: 26222ELM 2-320 Datasheet

Parametric EquivalentRFQ

ELM 4-315

Bivar Inc.In Stock: 4986ELM 4-315 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 7-310 is determined by the following criteria:

Primary Compatibility Requirements:

• Manufacturer: Bivar Inc. (maintains design consistency and quality standards)
• LED Type: T1 (ensures mechanical and electrical compatibility with LED packages)
• Material: Black PVC (maintains environmental and thermal properties)
• Lead Configuration: 2-Lead (preserves circuit board mounting compatibility)
• RoHS Status: ROHS3 Compliant (ensures regulatory compliance)
• Moisture Sensitivity Level: 1 (Unlimited) (maintains storage and handling requirements)
• Product Status: Active (ensures ongoing availability and support)

Dimensional Tolerance: Substitute parts operate within a length range of 0.310" to 0.320" (7.87mm to 8.13mm). This dimensional variance accommodates standard manufacturing tolerances while maintaining functional equivalence in vertical mounting applications.

The three identified substitute parts—ELM 2-315, ELM 2-320, and ELM 4-315—satisfy all primary compatibility requirements and fall within the acceptable dimensional range.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain Active product status, ensuring continued manufacturing support and supply chain reliability. Each substitute part carries ROHS3 compliance certification, satisfying regulatory requirements equivalent to the primary part.

ELM 2-315 and ELM 4-315 present identical length specifications at 0.315" (8.00mm), representing a 0.005" (0.13mm) increase from the ELM 7-310 baseline. Both parts maintain full compliance with all primary compatibility parameters.

ELM 2-320 provides the maximum dimensional variance at 0.320" (8.13mm), representing a 0.010" (0.26mm) increase from the ELM 7-310 baseline. This part remains within acceptable tolerance ranges for T1 LED standoff applications.

Selection between substitute parts should be based on specific application requirements regarding standoff height and available inventory levels. All substitute parts are manufactured by Bivar Inc. and carry identical material composition, LED type compatibility, and regulatory certifications.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-315, ELM 2-320, and ELM 4-315 be used interchangeably with ELM 7-310?

A: These parts are functionally equivalent for T1 LED standoff applications. All parts share identical material composition (black PVC), LED type compatibility (T1), lead configuration (2-lead), and regulatory compliance (ROHS3). Dimensional differences range from 0.005" to 0.010" in length, which falls within standard manufacturing tolerances for vertical mounting applications.

Q: What is the significance of the length variation between substitute parts?

A: The ELM 7-310 operates at 0.310" (7.87mm), while substitutes range from 0.315" to 0.320" (8.00mm to 8.13mm). These variations represent minor dimensional tolerances inherent to the standoff design. Selection should account for specific circuit board clearance requirements and LED package positioning specifications in the target application.

Q: Are all substitute parts manufactured by the same company?

A: Yes. All substitute parts—ELM 2-315, ELM 2-320, and ELM 4-315—are manufactured by Bivar Inc., the same manufacturer as the primary part ELM 7-310. This ensures consistent design standards, material quality, and manufacturing processes.

Q: Do substitute parts carry the same regulatory certifications?

A: All substitute parts carry ROHS3 compliance certification and maintain MSL 1 (Unlimited) moisture sensitivity rating, matching the primary part specifications. This ensures equivalent regulatory compliance for applications requiring RoHS certification.

Q: What packaging format is used for substitute parts?

A: All substitute parts are supplied in Bag packaging, consistent with the primary ELM 7-310 part. This maintains standardized handling and storage procedures across the product line.

Q: How do the series designations (ELM 2, ELM 4, ELM 7) affect substitution?

A: Series designations identify different product lines within the Bivar Inc. standoff portfolio. Despite different series assignments, all identified parts maintain identical functional parameters for T1 LED standoff applications, including material composition, LED type compatibility, and regulatory compliance. Series differences reflect manufacturing lineage rather than functional capability.