ELM 7-260 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 7-260 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.260" (6.60mm) length specification. This component is constructed from black PVC material and accommodates 2-lead configurations. The part maintains Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct functional replacement in applications where dimensional and material tolerances permit.

Substiute Parts

ELM 7-260

Bivar Inc.In Stock: 1183ELM 7-260 Datasheet

Current PartRFQ

H-131C-1-120

Bivar Inc.In Stock: 1967H-131C-1-120 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for LED standoffs is determined by the following parameters:

Primary Compatibility Criteria:

• LED type designation (T1)
• Lead count (2-lead)
• Color specification (Black)
• RoHS compliance level (ROHS3)
• Moisture sensitivity rating (MSL 1)
• Product status (Active)

Secondary Consideration:

• Material composition (PVC vs. Nylon) and length variance (0.260" vs. 0.250") represent mechanical differences that may affect fit in specific mounting applications but do not prevent functional substitution when dimensional tolerance is acceptable.

The substitute part H-131C-1-120 satisfies all primary compatibility criteria while introducing a 0.010" (0.25mm) length reduction and material change from PVC to Nylon.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 7-260 and H-131C-1-120 maintain Active product status with identical RoHS3 compliance and MSL 1 ratings, ensuring regulatory and environmental compatibility in equivalent applications.

Selection between these parts is determined by:

1. Mounting Depth Requirement: The 0.010" length difference (ELM 7-260 at 0.260" versus H-131C-1-120 at 0.250") must be evaluated against available PCB or chassis mounting depth. Applications with tight vertical clearance constraints may require the shorter H-131C-1-120 variant.

2. Material Specification: PVC (ELM 7-260) and Nylon (H-131C-1-120) exhibit different mechanical and thermal properties. Material selection depends on application-specific requirements for rigidity, temperature exposure, and chemical resistance.

3. Inventory Availability: H-131C-1-120 maintains higher stock levels (1950 pcs) compared to ELM 7-260 (1144 pcs), supporting supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can H-131C-1-120 directly replace ELM 7-260 in all applications?

A: H-131C-1-120 is functionally equivalent for T1 LED standoff applications requiring 2-lead black components with ROHS3 compliance. The 0.010" length reduction and material change from PVC to Nylon must be evaluated against specific mounting geometry and environmental requirements.

Q: What is the significance of the material difference between PVC and Nylon?

A: PVC and Nylon are both thermoplastic materials suitable for LED standoff applications. Nylon offers superior mechanical strength and temperature resistance, while PVC provides different rigidity characteristics. Material selection depends on application-specific thermal and mechanical load conditions.

Q: Are both parts suitable for the same packaging and handling requirements?

A: Both parts are supplied in Bag packaging with identical MSL 1 (Unlimited) ratings, indicating equivalent moisture sensitivity and storage requirements.

Q: How does the 0.010" length difference affect component selection?

A: The length variance represents a 3.8% reduction in standoff height. Applications with constrained vertical mounting space may benefit from the shorter H-131C-1-120 variant, while applications requiring maximum standoff height should retain ELM 7-260.

Q: Do both parts share the same regulatory compliance status?

A: Yes. Both ELM 7-260 and H-131C-1-120 are ROHS3 compliant with identical ECCN (EAR99) and HTSUS (3926.90.9985) classifications.