ELM 7-24MM

Part Overview

The ELM 7-24MM is an LED standoff component manufactured by Bivar Inc., classified as a T1 LED vertical mount in black PVC with a 0.945" (24.00mm) length. This component is currently in active production status and maintains full ROHS3 compliance. Alternative equivalent parts may be required due to inventory availability, design revisions, or supply chain optimization while maintaining electrical and mechanical compatibility.

Substiute Parts

ELM 7-24MM

Bivar Inc.In Stock: 860ELM 7-24MM Datasheet

Current PartRFQ

ELM 5-23MM

Bivar Inc.In Stock: 7185ELM 5-23MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 5-23MM serves as a parametric equivalent to the ELM 7-24MM based on shared critical mechanical and electrical specifications. Both components are T1 LED standoffs manufactured from black PVC by Bivar Inc. with identical moisture sensitivity ratings and RoHS3 compliance. The length differential of 0.035" (0.89mm) between the ELM 7-24MM (24.00mm) and ELM 5-23MM (23.11mm) represents a minor mechanical tolerance variance within typical PCB mounting applications for LED standoff assemblies. Substitution eligibility is determined by the following aligned parameters: LED type (T1), color (black), material (PVC), electrical compliance (ROHS3), moisture sensitivity (MSL 1), and packaging format (bag).

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 7-24MM and ELM 5-23MM maintain active production status from Bivar Inc. and satisfy ROHS3 compliance requirements. Selection between these components should be based on mechanical envelope constraints within the target application. The primary design consideration is the length specification: ELM 7-24MM at 0.945" (24.00mm) versus ELM 5-23MM at 0.910" (23.11mm). Both components carry identical electrical certifications, moisture sensitivity classifications, and material composition, confirming functional equivalence within applications tolerating the 0.035" (0.89mm) dimensional variance.

Frequently Asked Questions (FAQ)

Q: Can the ELM 5-23MM replace the ELM 7-24MM in all applications?

A: Substitution is valid for applications where the mechanical length difference of 0.035" (0.89mm) does not exceed the design tolerance envelope. Both parts are functionally equivalent as T1 LED standoffs with identical electrical and compliance specifications.

Q: Are there any compliance differences between these parts?

A: Both ELM 7-24MM and ELM 5-23MM carry identical RoHS3 compliance status and Moisture Sensitivity Level 1 ratings. No compliance differential exists between these components.

Q: What is the manufacturing basis for these two part numbers?

A: Both components are manufactured by Bivar Inc. as T1 LED vertical mount standoffs in black PVC. The ELM 7 and ELM 5 series designations reflect design iterations within the same product family, with length specification serving as the primary distinguishing parameter.

Q: Are inventory levels a consideration in part selection?

A: Inventory availability may influence procurement decisions. Current stock for ELM 5-23MM is 7087 units, while ELM 7-24MM shows 770 units. Consult component supply status for lead time and availability requirements specific to your application timeline.

Q: What packaging format should be expected?

A: Both the ELM 7-24MM and ELM 5-23MM are supplied in bag packaging format.