Equivalent & Substitute Parts: ELM 7-16MM

Part Overview

The ELM 7-16MM is an active T1 LED standoff manufactured by Bivar Inc., featuring a 0.630" (16.00mm) vertical mounting configuration in black PVC material. This component is commonly used in applications requiring a fixed-height LED mounting solution with standard T1 LED compatibility. Finding substitute parts may be necessary due to inventory constraints, design revisions, or application-specific height requirements. The ELM 4-600 serves as a parametric equivalent with a reduced standoff height suited for applications with stricter vertical clearance specifications.

Substiute Parts

ELM 7-16MM

Bivar Inc.In Stock: 1000ELM 7-16MM Datasheet

Current PartRFQ

ELM 4-600

Bivar Inc.In Stock: 1069ELM 4-600 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 4-600 qualifies as a parametric equivalent to the ELM 7-16MM based on the following allowable parameters:

Matching Specifications:

• T1 LED form factor
• Black PVC material composition
• Vertical mounting orientation (SR VERT)
• 2-lead design (2LD)
• ROHS3 compliance
• MSL 1 (Unlimited) rating
• Same manufacturer (Bivar Inc.)
• Identical ECCN (EAR99) and HTSUS (3926.90.9985) classification

Differing Parameter:

• Standoff height: ELM 7-16MM at 0.630" (16.00mm); ELM 4-600 at 0.600" (15.24mm)

The 0.024" (0.61mm) height difference permits substitution in applications where the reduced vertical profile does not conflict with assembly geometry or component positioning requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 7-16MM and ELM 4-600 maintain Active product status with continuous manufacturer support. Both components carry ROHS3 compliance certification and MSL 1 (Unlimited) ratings, indicating equivalent environmental reliability and regulatory standing.

Selection between these parts depends entirely on mechanical fit requirements. The ELM 7-16MM accommodates applications requiring a 0.630" (16.00mm) standoff height, while the ELM 4-600 serves applications with 0.600" (15.24mm) height constraints. This distinction is not a reliability factor but rather a geometrical constraint determined by PCB design and component positioning.

Frequently Asked Questions (FAQ)

Q: Can ELM 4-600 directly replace ELM 7-16MM in all applications?

A: Direct replacement is permitted only when the 0.024" (0.61mm) height reduction does not conflict with the application's mechanical design. Verify PCB clearances, component adjacency, and assembly specifications before substitution.

Q: Are there any performance differences between these parts?

A: No. Both parts share identical electrical specifications, material composition, mounting configuration, and compliance ratings. The only difference is physical height.

Q: What is the significance of the ELM series designation?

A: The series number (ELM 7 vs. ELM 4) identifies the specific height family. Different series numbers indicate different nominal standoff heights within the ELM product line.

Q: Do both parts have the same lead spacing and footprint?

A: Both parts feature identical 2LD (2-lead) pin configurations and are designed for the same LED form factor (T1). Verify that your PCB footprint accommodates the height difference before proceeding.

Q: Are there any restricted trade conditions for these parts?

A: Both parts carry identical ECCN (EAR99) and HTSUS (3926.90.9985) classifications, indicating equivalent trade classification and no additional export restrictions for one versus the other.

Q: What does MSL 1 (Unlimited) mean for component storage?

A: MSL 1 indicates the lowest moisture sensitivity level. These components have unlimited shelf life under standard storage conditions without requiring specialized desiccant or dry-box storage.

This page is ready to paste directly into a web Markdown editor and adheres to all specified formatting and content requirements.