ELM 7-12MM

Part Overview

The ELM 7-12MM is an active LED standoff manufactured by Bivar Inc., classified as a T1 LED vertical mount component. This black PVC standoff measures 0.472" (11.99mm) in length and is designed to elevate and support LED assemblies in two-lead configurations. The part is RoHS3 compliant and carries MSL 1 (Unlimited) moisture sensitivity rating, indicating suitability for standard manufacturing and storage environments.

The need for substitute components arises from inventory availability, lead-time constraints, or specific design revisions where dimensional or electrical tolerance variations are acceptable within the application's operational requirements.

Substiute Parts

ELM 7-12MM

Bivar Inc.In Stock: 830ELM 7-12MM Datasheet

Current PartRFQ

ELM 5-485

Bivar Inc.In Stock: 10104ELM 5-485 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 5-485 is identified as a parametric equivalent to the ELM 7-12MM based on the following key parameter alignment:

Common Parameters:

• LED Type: Both parts utilize T1 LED form factor
• Color: Both are black
• Material: Both employ PVC construction
• Lead Count: Both are configured with 2 leads
• Manufacturer: Both are manufactured by Bivar Inc.
• RoHS Compliance: Both meet RoHS3 requirements
• Moisture Sensitivity Level: Both are MSL 1 (Unlimited)
• Product Status: Both are active products

Variable Parameter:

• Length: The ELM 7-12MM measures 0.472" (11.99mm), while the ELM 5-485 measures 0.485" (12.32mm), representing a dimensional difference of 0.013" (0.33mm)

The substitution relationship is valid when the application's mounting height tolerance accommodates the 0.013" dimensional variation between these components.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 7-12MM and ELM 5-485 carry active product status and are fully compliant with RoHS3 standards. Selection between these components should be based on the specific mounting height requirements of the application. The ELM 7-12MM provides the shorter standoff at 0.472" (11.99mm), while the ELM 5-485 offers increased elevation at 0.485" (12.32mm). Both parts maintain identical MSL 1 (Unlimited) ratings, ensuring equivalent environmental performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the ELM 5-485 be used as a direct replacement for the ELM 7-12MM?

A: The ELM 5-485 can be substituted when the application's mechanical envelope accommodates the 0.485" length specification. The 0.013" dimensional difference must fall within the design's tolerance stack-up for PCB mounting height clearance and component positioning.

Q: Are there differences in electrical performance between these two parts?

A: Both parts are passive mechanical standoffs for T1 LED assemblies. Electrical performance is determined by the installed LED component, not the standoff structure. The standoff material and construction are identical between the two parts.

Q: Do both parts meet the same environmental and compliance standards?

A: Yes. Both the ELM 7-12MM and ELM 5-485 are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity ratings. Both parts are suitable for equivalent manufacturing and storage conditions.

Q: What packaging is provided for these parts?

A: Both parts are supplied in bag packaging format suitable for standard component distribution and assembly workflows.

Q: Are there inventory considerations for these substitutes?

A: Inventory availability may vary between part numbers. Design documentation should specify the applicable part number to ensure accurate procurement from the selected source.