ELM 5-6MM LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-6MM is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.240" (6.10mm) length and accommodates T1 LED packages with 2-lead configurations. The part maintains Active product status and full RoHS3 compliance, making it suitable for current production environments.

Equivalent and substitute parts are identified when they share critical functional parameters including LED type (T1), lead configuration (2LD), color (Black), and material compatibility, while maintaining the same regulatory compliance standards.

Substiute Parts

ELM 5-6MM

Bivar Inc.In Stock: 748ELM 5-6MM Datasheet

Current PartRFQ

ELM 4-6MM

Bivar Inc.In Stock: 1817ELM 4-6MM Datasheet

Parametric EquivalentRFQ

ELM 5-235

Bivar Inc.In Stock: 20480ELM 5-235 Datasheet

Parametric EquivalentRFQ

H-131C-1-120

Bivar Inc.In Stock: 1967H-131C-1-120 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 5-6MM are qualified based on the following critical parameters that determine functional interchangeability:

Primary Substitution Criteria:

• LED Type: T1 (all substitutes maintain T1 compatibility)
• Lead Configuration: 2LD (all substitutes support 2-lead LED packages)
• Color: Black (consistent across all alternatives)
• Regulatory Compliance: ROHS3 Compliant (all substitutes meet this requirement)
• Moisture Sensitivity Level: MSL 1 (all substitutes rated MSL 1)

Secondary Considerations:

• Length tolerance: Substitutes range from 0.235" to 0.250", representing minor dimensional variations within typical PCB mounting tolerances
• Material variation: PVC and Nylon materials both provide equivalent mechanical and electrical performance for LED standoff applications

The three identified substitutes (ELM 4-6MM, ELM 5-235, H-131C-1-120) meet all primary criteria and are therefore functionally equivalent for T1 LED mounting applications.

Parameter Comparison

Engineering Selection Recommendations

ELM 4-6MM is a direct parametric equivalent to ELM 5-6MM. Both parts share identical dimensions (0.240"), material (PVC), and all electrical/mechanical specifications. Selection between these two parts depends on series availability and inventory considerations. Both maintain Active product status and full ROHS3 compliance.

ELM 5-235 provides a functionally equivalent alternative with a minor length reduction of 0.005" (0.13mm). This part remains within the same ELM 5 series as the primary part and maintains PVC construction. The dimensional difference is negligible for most PCB mounting applications and does not affect LED compatibility or electrical performance.

H-131C-1-120 offers substitution with material variation (Nylon instead of PVC) and a slight length increase of 0.010" (0.25mm). The H-131 series construction provides equivalent mechanical support for T1 LED packages. Material selection between PVC and Nylon should be based on specific environmental or thermal requirements of the application, as both materials are ROHS3 compliant and rated MSL 1.

All four parts carry identical regulatory classifications (ECCN: EAR99, HTSUS: 3926.90.9985) and are suitable for direct substitution in production environments.

Frequently Asked Questions (FAQ)

Q: Can ELM 4-6MM be used as a direct replacement for ELM 5-6MM?

A: Yes. ELM 4-6MM is a parametric equivalent with identical length (0.240"), material (PVC), LED type (T1), and lead configuration (2LD). Both parts are manufactured by Bivar Inc., maintain Active status, and are ROHS3 compliant.

Q: What is the significance of the length difference between ELM 5-235 and ELM 5-6MM?

A: ELM 5-235 is 0.005" (0.13mm) shorter than ELM 5-6MM. This minor dimensional variation does not affect T1 LED compatibility or electrical performance. Selection depends on specific PCB standoff height requirements for your application.

Q: Why is H-131C-1-120 listed as a substitute if it uses Nylon instead of PVC?

A: Both PVC and Nylon materials provide equivalent mechanical and electrical performance for T1 LED standoff applications. H-131C-1-120 maintains all critical functional parameters: T1 LED type, 2-lead configuration, Black color, ROHS3 compliance, and MSL 1 rating. Material selection should be based on environmental or thermal requirements specific to your design.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All parts listed (ELM 5-6MM, ELM 4-6MM, ELM 5-235, H-131C-1-120) are supplied in Bag packaging.

Q: Do all substitute parts meet the same regulatory requirements?

A: Yes. All parts are ROHS3 compliant, carry ECCN classification EAR99, and share the same HTSUS code (3926.90.9985). MSL rating is 1 (Unlimited) for all parts.

Q: What inventory levels are available for each part?

A: ELM 5-6MM: 697 Pcs; ELM 4-6MM: 1737 Pcs; ELM 5-235: 20398 Pcs; H-131C-1-120: 1950 Pcs (all listed as New Original In Stock).