ELM 5-6.5MM LED Holder Equivalent & Substitute Parts

Part Overview

The ELM 5-6.5MM is an active T1 LED standoff holder manufactured by Bivar Inc., designed for through-hole LED mounting applications. This black PVC component measures 0.256" (6.50mm) in length and provides mechanical support and alignment for T1-sized LEDs in electronic assemblies. The part is ROHS3 compliant and carries MSL Level 1 rating, indicating unlimited shelf life under standard storage conditions. Substitute parts are identified when equivalent functional performance can be achieved through alternative materials or minor dimensional variations within acceptable engineering tolerances for T1 LED holder applications.

Substiute Parts

ELM 5-6.5MM

Bivar Inc.In Stock: 740ELM 5-6.5MM Datasheet

Current PartRFQ

H-131C-1-120

Bivar Inc.In Stock: 1967H-131C-1-120 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 5-6.5MM is determined by the following critical parameters:

LED Type Compatibility: Both the main part and substitute must accommodate T1-sized LEDs. This is the primary functional requirement.

Color: Black color specification must be maintained for visual consistency in assemblies.

RoHS Compliance: All substitute parts must meet ROHS3 compliance requirements.

Material Tolerance: The main part uses PVC; substitutes may use alternative polymeric materials (such as Nylon) provided mechanical fit and electrical isolation properties remain equivalent for T1 LED holder applications.

Dimensional Tolerance: Length specifications may vary within 0.006" (0.15mm) of the main part dimension without affecting T1 LED seating or assembly compatibility.

MSL Rating: Substitute parts must maintain MSL Level 1 or equivalent moisture sensitivity classification.

The identified substitute H-131C-1-120 meets all substitution criteria through equivalent T1 LED accommodation, black color, ROHS3 compliance, and compatible dimensional specifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: ELM 5-6.5MM is the specified component for new designs and should be used when available. This part is active in production with confirmed inventory availability (669 Pcs).

Substitute Selection: H-131C-1-120 is qualified as a direct substitute when ELM 5-6.5MM is unavailable. Both parts are manufactured by Bivar Inc., carry identical ROHS3 and MSL certifications, and are classified as active products. The substitute accommodates T1 LEDs with equivalent mechanical and electrical performance. The 0.006" (0.15mm) length difference falls within standard assembly tolerances for LED holder applications.

Compliance Verification: Both parts meet ROHS3 requirements and carry EAR99 ECCN classification. No additional compliance documentation is required for substitution.

Frequently Asked Questions (FAQ)

Q: Can H-131C-1-120 be used as a direct replacement for ELM 5-6.5MM in existing assemblies?

A: Yes. Both parts are T1 LED holders with black color, ROHS3 compliance, and MSL Level 1 rating. The 0.006" length difference is within standard mechanical tolerances for LED standoff applications and does not affect T1 LED seating or circuit board assembly.

Q: What is the material difference between these parts?

A: ELM 5-6.5MM uses PVC material, while H-131C-1-120 uses Nylon. Both are polymeric materials suitable for LED holder applications, providing equivalent electrical isolation and mechanical support for T1 LEDs.

Q: Are both parts ROHS3 compliant?

A: Yes. Both ELM 5-6.5MM and H-131C-1-120 are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity ratings.

Q: What packaging format is used for these parts?

A: Both parts are supplied in Bag packaging format.

Q: Are there any electrical performance differences between these substitutes?

A: No. Both parts function as mechanical LED holders and do not introduce electrical performance variations. Substitution is based on equivalent T1 LED accommodation and compliance certifications.