ELM 5-615 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-615 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.615" (15.62mm) length. This component is constructed from black PVC material and accommodates 3MM LED configurations with 2-lead connections. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments. Substitute parts are identified when inventory constraints, lead time requirements, or design flexibility necessitate alternative components that maintain functional equivalence within specified mechanical and electrical tolerances.

Substiute Parts

ELM 5-615

Bivar Inc.In Stock: 1121ELM 5-615 Datasheet

Current PartRFQ

ELM 4-600

Bivar Inc.In Stock: 1069ELM 4-600 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 5-615 is determined by strict adherence to the following parameters:

Critical Matching Parameters:

• LED Type: T1
• Material: Black PVC
• Configuration: Vertical Mount, 3MM, 2-Lead
• Manufacturer: Bivar Inc.
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variance:

• Length tolerance: Components within the ELM series with length specifications that accommodate the same mounting footprint and lead configuration

The ELM 4-600 qualifies as a parametric equivalent based on matching LED type, material composition, mounting orientation, lead configuration, compliance certifications, and moisture sensitivity rating. The length differential of 0.015" (0.38mm) represents a mechanical tolerance variation within the ELM series design parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 5-615 and ELM 4-600 maintain Active product status within the Bivar Inc. portfolio, ensuring continued manufacturing support and supply chain availability. Both components satisfy ROHS3 compliance requirements and carry MSL 1 (Unlimited) moisture sensitivity ratings, indicating equivalent environmental performance characteristics.

Selection between these parts is determined by specific application length requirements. The ELM 5-615 provides 0.615" (15.62mm) standoff height, while the ELM 4-600 provides 0.600" (15.24mm) standoff height. The 0.015" (0.38mm) length differential must be evaluated against PCB layout constraints, component clearance requirements, and mechanical assembly specifications.

Both components are supplied in Bag packaging and share identical electrical and material specifications for T1 LED mounting applications.

Frequently Asked Questions (FAQ)

Q: Can the ELM 4-600 be used as a direct replacement for the ELM 5-615?

A: The ELM 4-600 is a parametric equivalent with matching LED type, material, mounting configuration, and compliance certifications. The primary difference is length: 0.600" versus 0.615". Substitution is valid only when the 0.015" (0.38mm) length reduction does not conflict with PCB layout, component spacing, or mechanical assembly requirements.

Q: What parameters must remain identical for substitution?

A: LED type (T1), material (Black PVC), mounting orientation (Vertical), lead configuration (3MM, 2-Lead), manufacturer (Bivar Inc.), RoHS compliance (ROHS3), and moisture sensitivity level (MSL 1) must remain unchanged. Length variation within the ELM series is the only allowable parameter variance.

Q: Are both parts available in the same packaging format?

A: Yes. Both the ELM 5-615 and ELM 4-600 are supplied in Bag packaging, ensuring consistent handling and storage procedures.

Q: What is the significance of the MSL 1 rating for both parts?

A: MSL 1 (Unlimited) indicates that both components have unlimited shelf life and do not require special moisture control during storage or handling. This rating applies equally to both the main part and substitute.

Q: How do the series designations (ELM 5 vs. ELM 4) affect substitution?

A: Series designation reflects the design generation within the ELM standoff family. Both ELM 5 and ELM 4 series maintain identical electrical and material specifications for T1 LED applications. The series difference corresponds to the length variation and does not affect functional compatibility in applications where the length tolerance is acceptable.