ELM 5-530 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-530 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.530" (13.46mm) length. This component is constructed from black PVC material and accommodates 3MM 2-lead LED configurations. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments.

Substitute parts become necessary when the primary part experiences inventory constraints, extended lead times, or when design flexibility permits dimensional variation within acceptable tolerances. The ELM 5-530 has identified parametric equivalents that maintain functional compatibility while offering alternative sourcing options.

Substiute Parts

ELM 5-530

Bivar Inc.In Stock: 861ELM 5-530 Datasheet

Current PartRFQ

ELM 2-510

Bivar Inc.In Stock: 1857ELM 2-510 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the ELM 5-530 is based on the following allowed parameters:

Primary Compatibility Criteria:

• LED Type: T1 (must match exactly)
• Material: Black PVC (must match exactly)
• Lead Configuration: 2LD (must match exactly)
• Mounting Orientation: Vertical (must match exactly)
• Color: Black (must match exactly)
• RoHS Status: ROHS3 Compliant (must match exactly)
• Moisture Sensitivity Level: MSL 1 (must match exactly)

Variable Parameter:

• Length: Dimensional tolerance permits variation within the standoff height specification

The ELM 2-510 qualifies as a parametric equivalent because it maintains identical specifications across all critical compatibility parameters. The length differential of 0.020" (0.51mm) represents a dimensional variation that falls within acceptable substitution criteria for this product category, as both parts share the same T1 LED interface, PVC material composition, 2-lead configuration, and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

ELM 5-530 Primary Selection: Select the ELM 5-530 when the 0.530" (13.46mm) standoff height is specified in the design documentation. This part maintains Active product status with 770 units in current inventory and full ROHS3 compliance certification.

ELM 2-510 Substitute Selection: The ELM 2-510 serves as a parametric equivalent when design specifications permit a 0.020" (0.51mm) reduction in standoff height. This substitute maintains identical material composition, LED interface compatibility, lead configuration, and regulatory compliance. The ELM 2-510 offers enhanced inventory availability with 1846 units in stock and equivalent ROHS3 compliance status.

Both parts carry identical ECCN (EAR99) and HTSUS (3926.90.9985) classifications, ensuring consistent regulatory treatment in procurement and logistics operations.

Frequently Asked Questions (FAQ)

Q: What determines whether ELM 2-510 can replace ELM 5-530 in my application?

A: The ELM 2-510 qualifies as a substitute when your design accommodates a 0.020" (0.51mm) reduction in standoff height. All other specifications—T1 LED interface, black PVC material, 2-lead configuration, vertical mounting orientation, and regulatory compliance—remain identical between the two parts.

Q: Are there any differences in RoHS compliance between these parts?

A: No. Both ELM 5-530 and ELM 2-510 carry identical ROHS3 compliance certification and MSL 1 (Unlimited) moisture sensitivity ratings. They are equivalent from a regulatory and environmental standpoint.

Q: What is the significance of the series designation (ELM 5 versus ELM 2)?

A: The series designation reflects the manufacturer's product line organization. ELM 5 and ELM 2 series parts share identical material, LED type, lead configuration, and compliance specifications. The series number does not indicate functional incompatibility; rather, it reflects design generation or product family categorization within Bivar Inc.'s portfolio.

Q: Can I use ELM 2-510 if my PCB layout is designed for 0.530" height?

A: The ELM 2-510 has a 0.020" shorter standoff height. Physical fit depends on your specific PCB clearance requirements and component placement constraints. Verify that the reduced height does not create interference with adjacent components or violate design spacing requirements.

Q: What packaging format is used for both parts?

A: Both ELM 5-530 and ELM 2-510 are supplied in Bag packaging format, consistent with standard component distribution for LED standoff assemblies.

Q: Are there other substitutes available for ELM 5-530?

A: The provided data identifies ELM 2-510 as the parametric equivalent. The ELM 2-510 itself lists additional substitutes (ELM 2-500, ELM 5-485) in its cross-reference data, indicating a broader family of compatible standoff options within the Bivar Inc. product line.