ELM 5-480 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-480 is a T1 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.480" (12.19mm) vertical mounting height. This component is designed for applications requiring precise LED positioning and alignment in vertical orientation with a 3mm LED form factor and 2-lead configuration.

The ELM 5-480 maintains Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified based on matching electrical characteristics, mechanical compatibility, and material specifications while accommodating minor dimensional variations within acceptable engineering tolerances for LED standoff applications.

Substiute Parts

ELM 5-480

Bivar Inc.In Stock: 891ELM 5-480 Datasheet

Current PartRFQ

ELM 2-500

Bivar Inc.In Stock: 4576ELM 2-500 Datasheet

Parametric EquivalentRFQ

ELM 5-485

Bivar Inc.In Stock: 10104ELM 5-485 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 5-480 are qualified based on the following critical parameters:

Matching Criteria:

• Manufacturer: Bivar Inc. (same manufacturer ensures consistent quality and design standards)
• LED Type: T1 (identical LED form factor)
• Material: Black PVC (identical material composition)
• Configuration: Vertical Mount, Single Row, 2-Lead (identical mounting orientation and electrical interface)
• RoHS Status: ROHS3 Compliant (identical regulatory compliance)
• Moisture Sensitivity Level: 1 (identical environmental rating)

Variable Parameter:

• Length (Height): Acceptable range 0.480" to 0.500" (12.19mm to 12.70mm) for vertical standoff applications

The ELM 2-500 and ELM 5-485 are classified as parametric equivalents due to their dimensional variation within the acceptable range for LED standoff positioning, while maintaining all other electrical and mechanical specifications identical to the ELM 5-480.

Parameter Comparison

Engineering Selection Recommendations

ELM 5-480 Primary Selection: Select the ELM 5-480 when the exact 0.480" (12.19mm) standoff height is specified in the design documentation. This part maintains Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating.

ELM 5-485 Substitute Selection: The ELM 5-485 provides a 0.005" (0.13mm) height increase to 0.485" (12.32mm). This substitute is appropriate when minor dimensional variation is acceptable within the application's mechanical tolerance stack. The ELM 5-485 maintains identical electrical and material specifications with Active product status and ROHS3 compliance.

ELM 2-500 Substitute Selection: The ELM 2-500 provides a 0.020" (0.51mm) height increase to 0.500" (12.70mm). This substitute is appropriate for applications with broader mechanical tolerances accommodating the larger standoff height. The ELM 2-500 maintains identical electrical and material specifications with Active product status and ROHS3 compliance.

All three parts carry identical regulatory certifications (ROHS3, EAR99, HTSUS 3926.90.9985) and environmental ratings (MSL 1), ensuring compliance consistency across substitution scenarios.

Frequently Asked Questions (FAQ)

Q: What determines if ELM 2-500 or ELM 5-485 can substitute for ELM 5-480?

A: Substitution is determined by matching the following parameters: T1 LED type, black PVC material, vertical mount configuration, 2-lead design, ROHS3 compliance, and MSL 1 rating. The standoff height variation (0.480" to 0.500") is acceptable within the parametric equivalent classification for LED standoff applications.

Q: What is the maximum height difference between the main part and substitutes?

A: The ELM 5-480 (0.480") to ELM 2-500 (0.500") represents the maximum height difference of 0.020" (0.51mm). The ELM 5-485 (0.485") represents a 0.005" (0.13mm) increase. Selection depends on the application's mechanical tolerance requirements.

Q: Are all three parts manufactured by the same company?

A: Yes, all three parts—ELM 5-480, ELM 2-500, and ELM 5-485—are manufactured by Bivar Inc., ensuring consistent design standards and quality control across the product line.

Q: Do substitute parts maintain the same regulatory compliance?

A: Yes, all substitute parts maintain identical ROHS3 compliance, MSL 1 rating, EAR99 ECCN classification, and HTSUS code 3926.90.9985. Regulatory compliance is consistent across all three parts.

Q: What is the difference between ELM 5-485 and ELM 2-500?

A: The primary difference is standoff height: ELM 5-485 is 0.485" (12.32mm) and ELM 2-500 is 0.500" (12.70mm). Both are parametric equivalents to ELM 5-480 with identical material, LED type, configuration, and compliance specifications. Selection is based on the application's dimensional requirements.

Q: Can these parts be used interchangeably in all applications?

A: Interchangeability depends on the application's mechanical tolerance for standoff height variation. Applications with strict height specifications require the exact ELM 5-480. Applications with broader tolerances can accommodate the ELM 5-485 (±0.005") or ELM 2-500 (±0.020") substitutes.

Q: What packaging format is used for these parts?

A: All three parts are supplied in Bag packaging format, consistent with standard component distribution for LED standoff assemblies.