ELM 5-470 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-470 is a T1 LED standoff manufactured by Bivar Inc., designed as a vertical mounted component with a 0.470" (11.94mm) height. This part is constructed from black PVC material and accommodates 2-lead T1 format LEDs. The ELM 5-470 maintains Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Alternative models are necessary when application requirements specify different standoff heights while maintaining compatibility with T1 LED packages and vertical mounting orientation.

Substiute Parts

ELM 5-470

Bivar Inc.In Stock: 1089ELM 5-470 Datasheet

Current PartRFQ

ELM 5-485

Bivar Inc.In Stock: 10104ELM 5-485 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 5-470 belongs to the ELM 5 series of T1 LED standoffs. Substitution within this product family is determined by the following critical parameters: LED type (T1), material composition (black PVC), lead configuration (2-lead), mounting orientation (vertical), and manufacturer series (ELM 5). The height dimension is the primary variable distinguishing alternative models. The substitute part ELM 5-485 shares all functional characteristics with the main part except for the standoff height specification. Both parts maintain identical electrical and mechanical compliance profiles, including ROHS3 certification, MSL 1 rating, and tariff classification. Selection between these parts depends solely on the required standoff height for the specific application.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 5-470 and ELM 5-485 maintain Active product status with identical compliance certifications. Selection between these parts is determined by the application's standoff height requirement. The ELM 5-470 provides a 0.470" height dimension, while the ELM 5-485 provides 0.485" height. Both parts satisfy ROHS3 compliance and MSL 1 moisture sensitivity requirements without limitation. The choice between these alternatives should be based exclusively on the mechanical spacing requirements within the target assembly, as all other electrical, material, and regulatory parameters are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the ELM 5-485 substitute for the ELM 5-470 in an existing design?

A: Substitution is possible only if the application's mechanical design accommodates the increased standoff height of 0.485" (12.32mm) versus 0.470" (11.94mm). The height difference of 0.015" (0.38mm) must be evaluated against PCB routing, component clearance, and assembly constraints.

Q: Are the electrical and compliance characteristics identical between these parts?

A: Yes. Both parts are manufactured by Bivar Inc. within the same ELM 5 series, share identical T1 LED package compatibility, material composition, lead configuration, ROHS3 compliance status, and MSL 1 moisture sensitivity rating. No electrical parameter differences exist between these alternatives.

Q: What is the primary technical difference between ELM 5-470 and ELM 5-485?

A: The sole technical difference is the standoff height dimension. The ELM 5-470 measures 0.470" (11.94mm), while the ELM 5-485 measures 0.485" (12.32mm). All other specifications, including LED accommodation, material, color, mounting orientation, and compliance certifications, are identical.

Q: Which part should be selected based on inventory availability?

A: The ELM 5-485 has significantly higher inventory availability at 10054 pieces compared to 984 pieces for the ELM 5-470. If application requirements allow height tolerance, the ELM 5-485 offers superior supply security.

Q: Are both parts suitable for moisture-sensitive environments?

A: Both parts have MSL 1 rating, indicating unlimited moisture sensitivity capability. No special storage, handling, or baking requirements are necessary for either part prior to assembly.