ELM 5-370 Equivalent and Substitute Parts

Part Overview

The ELM 5-370 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.370" (9.40mm) height. The component is constructed from black PVC material and accommodates 3mm LEDs with 2 leads. This active product is fully RoHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity tolerance.

Alternative parts may be required due to inventory constraints, specific mechanical height requirements, or material composition preferences for particular thermal or environmental conditions.

Substiute Parts

ELM 5-370

Bivar Inc.In Stock: 1039ELM 5-370 Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the ELM 5-370 is determined by the following critical parameters:

• LED Type: T1 standard form factor (3mm)
• Lead Configuration: 2-lead design
• Color: Black
• Material: PVC or equivalent polymer
• Mechanical Height: Tolerance range of ±0.015" (0.380mm) from nominal 0.370"
• RoHS Compliance: ROHS3 Compliant certification required
• MSL Rating: MSL 1 (Unlimited)

The substitute parts listed below meet these criteria and maintain functional equivalence for standard vertical LED mounting applications. Variations in material composition (PVC to Nylon) and minor height differences within the specified tolerance range do not affect electrical or mechanical compatibility in standard circuit board applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ELM 5-370, ELM 2-365, and H-201C—are active products with identical RoHS3 compliance and MSL 1 ratings, ensuring full compliance with modern electronic assembly standards.

ELM 5-370 (Primary specification): Use when the nominal 0.370" height is required for precise vertical spacing in circuit board applications. Offers PVC construction with consistent thermal properties.

ELM 2-365 (Height variant): Use when 0.365" height is acceptable within mechanical tolerances. PVC material composition matches the primary part. High inventory availability (16,125 pieces) supports supply chain flexibility.

H-201C (Material variant): Use when nylon construction is preferred for thermal resistance or mechanical durability. The 0.380" height represents the upper height tolerance range. Substantial inventory (63,104 pieces) provides consistent availability.

All substitutes maintain the T1 LED form factor, 2-lead configuration, and black color specification required for standard mounting applications.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the ELM 5-370?

A: Substitutes must maintain T1 LED type, 2-lead configuration, black color, and height within the 0.365" to 0.380" range. RoHS3 compliance and MSL 1 rating are mandatory. Material composition (PVC or Nylon) does not affect electrical compatibility.

Q: How does the height difference affect application compatibility?

A: The height variations among substitutes (0.365" to 0.380") fall within standard mechanical tolerance ranges for vertical LED mounting. Application compatibility depends on specific circuit board clearances and mechanical spacing requirements, which are not provided in the technical specifications.

Q: Are there material compatibility differences between PVC and Nylon options?

A: Both PVC (ELM 5-370, ELM 2-365) and Nylon (H-201C) are polymeric materials meeting ROHS3 compliance. Nylon offers superior thermal resistance; PVC provides standard dielectric properties. Selection depends on application-specific thermal or environmental requirements not specified in the parametric data.

Q: What is the MSL 1 rating significance?

A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture control requirements. All three substitute parts share this rating, eliminating storage and handling concerns across all options.

Q: How is inventory availability relevant to component selection?

A: Inventory levels (948 pcs for ELM 5-370; 16,125 pcs for ELM 2-365; 63,104 pcs for H-201C) reflect supply availability. Higher inventory in ELM 2-365 and H-201C may support expedited sourcing or volume production schedules.