ELM 5-360 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-360 is a T1 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.360" (9.14mm) vertical mounting height. This component is designed for vertical LED mounting applications requiring precise standoff positioning. The part maintains Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts become necessary when the ELM 5-360 experiences supply constraints, extended lead times, or when design specifications permit tolerance variations in standoff height within the allowed mechanical parameters.

Substiute Parts

ELM 5-360

Bivar Inc.In Stock: 1109ELM 5-360 Datasheet

Current PartRFQ

ELM 2-350

Bivar Inc.In Stock: 3583ELM 2-350 Datasheet

Parametric EquivalentRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 5-360 is determined by strict adherence to the following parameters:

Critical Parameters (Must Match):

• LED Type: T1
• Material: Black PVC
• Mounting Orientation: Vertical (SR VERT)
• Manufacturer: Bivar Inc.
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameter:

• Height: ±0.005" tolerance band (0.355" to 0.365")

The ELM 5-360 accepts substitutes ELM 2-350 and ELM 2-365 based on mechanical height compatibility within standard PCB assembly tolerances. Both substitute parts maintain identical material composition, LED type, mounting orientation, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (ELM 5-360): Use the ELM 5-360 when exact 0.360" (9.14mm) height specification is required by PCB design documentation. This part maintains Active status with confirmed inventory availability.

Secondary Selection (ELM 2-365): The ELM 2-365 provides the closest height match at 0.365" (9.27mm), representing a +0.005" variance from the primary specification. This substitute is suitable when design tolerance permits ±0.005" height variation. Inventory availability is highest among all options at 16,125 pieces.

Tertiary Selection (ELM 2-350): The ELM 2-350 operates at 0.350" (8.89mm), representing a -0.010" variance from the primary specification. This substitute is suitable only when design documentation explicitly permits -0.010" height tolerance. Inventory availability is 3,507 pieces.

All three parts maintain identical RoHS3 compliance, MSL 1 rating, and Active product status. Selection should be based on PCB assembly drawing tolerance specifications and current inventory requirements.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-350 and ELM 2-365 be used interchangeably with ELM 5-360?

A: Interchangeability depends on PCB design tolerance specifications. The ELM 5-360 specifies 0.360" height. ELM 2-365 (0.365") represents +0.005" variance; ELM 2-350 (0.350") represents -0.010" variance. Both are acceptable only if the PCB assembly drawing permits these height tolerances.

Q: Are there material or compliance differences between the three parts?

A: No. All three parts are manufactured from black PVC, maintain ROHS3 compliance, carry MSL 1 rating, and are produced by Bivar Inc. Material composition and environmental certifications are identical.

Q: What is the difference between ELM 5 and ELM 2 series designations?

A: The series designation reflects internal Bivar Inc. product line organization. Both series contain T1 LED standoffs with identical material, compliance, and mounting characteristics. Series designation does not affect functional compatibility.

Q: Which substitute part should be selected for new designs?

A: Selection is determined by PCB assembly tolerance requirements, not by part series. Consult the PCB design drawing for allowable height tolerance. If tolerance is ±0.005", ELM 2-365 is preferred due to highest inventory availability (16,125 pieces). If tolerance is ±0.010", either ELM 2-350 or ELM 2-365 is acceptable.

Q: Are all three parts available in the same packaging format?

A: Yes. ELM 5-360, ELM 2-350, and ELM 2-365 are all supplied in Bag packaging format.