ELM 5-295 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 5-295 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.295" (7.49mm) length. This component features a black PVC construction and accommodates 3mm LED packages with 2-lead configurations. The part maintains Active product status and is RoHS3 compliant with MSL Level 1 rating, indicating unlimited moisture sensitivity tolerance.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in circuit designs where dimensional and material tolerances permit.

Substiute Parts

ELM 5-295

Bivar Inc.In Stock: 1107ELM 5-295 Datasheet

Current PartRFQ

ELM 2-285

Bivar Inc.In Stock: 1981ELM 2-285 Datasheet

Parametric EquivalentRFQ

H-101C

Bivar Inc.In Stock: 22198H-101C Datasheet

Parametric EquivalentRFQ

H-101C-1

Bivar Inc.In Stock: 12044H-101C-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 5-295 is determined by the following critical parameters:

Primary Compatibility Criteria:

• LED Type: T1
• LED Size: 3MM
• Lead Configuration: 2LD
• Mounting Orientation: Vertical
• Color: Black
• RoHS Compliance: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)
• Manufacturer: Bivar Inc.

Secondary Tolerance Parameters:

• Length: Variations within mechanical assembly constraints
• Material: PVC or equivalent polymer (Nylon acceptable for mechanical compatibility)

The identified substitutes maintain all primary compatibility criteria. Length variations (0.295" vs. 0.285") represent minor dimensional differences within standard PCB assembly tolerances. Material substitution from PVC to Nylon is permissible where thermal and mechanical requirements align with the application context.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-285 Selection Criteria: ELM 2-285 maintains identical material composition (PVC) and all primary electrical parameters as the ELM 5-295. The 0.010" (0.25mm) length reduction represents a minor dimensional variance suitable for applications where vertical standoff height permits reduced clearance. Both parts share ROHS3 compliance and MSL Level 1 rating. Selection of ELM 2-285 is appropriate when inventory availability or cost optimization is prioritized without compromising mechanical fit.

H-101C and H-101C-1 Selection Criteria: H-101C and H-101C-1 are functionally equivalent substitutes with material composition change from PVC to Nylon. Both maintain T1 LED accommodation, 3MM size compatibility, and 2-lead configuration. The 0.285" length matches ELM 2-285 specifications. Nylon material provides enhanced mechanical durability in high-vibration environments while maintaining ROHS3 compliance and MSL Level 1 rating. H-101C offers significantly higher inventory availability (22132 Pcs) compared to H-101C-1 (11998 Pcs), supporting supply chain continuity.

Compliance Verification: All substitute parts maintain Active product status, ROHS3 compliance, and MSL Level 1 rating, confirming regulatory alignment with the main part specification.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-285 directly replace ELM 5-295 in existing PCB designs?

A: ELM 2-285 is a direct substitute where the 0.010" (0.25mm) length reduction does not conflict with mechanical assembly constraints or clearance requirements. Both parts share identical LED type (T1), size (3MM), lead configuration (2LD), material (PVC), and compliance ratings. Verification of vertical standoff height tolerance in the target application is required.

Q: What is the material difference between ELM 5-295 and H-101C?

A: ELM 5-295 uses PVC material, while H-101C uses Nylon. Both materials are black-colored polymers suitable for LED standoff applications. Nylon provides superior mechanical strength and vibration resistance. Material selection depends on environmental conditions and mechanical stress requirements of the specific application.

Q: Are H-101C and H-101C-1 interchangeable?

A: H-101C and H-101C-1 are functionally equivalent with identical electrical and mechanical parameters. Both feature T1 LED accommodation, 3MM size, 2-lead configuration, 0.285" length, Nylon construction, and ROHS3 compliance. Substitution between these parts is permissible without design modification.

Q: What does MSL Level 1 rating indicate for these parts?

A: MSL Level 1 rating indicates unlimited moisture sensitivity tolerance. These LED standoffs require no special moisture control during storage, handling, or assembly processes, simplifying supply chain management and manufacturing procedures.

Q: Which substitute part offers the best inventory availability?

A: H-101C provides the highest inventory availability at 22132 pieces, followed by H-101C-1 at 11998 pieces, ELM 2-285 at 1874 pieces, and ELM 5-295 at 1028 pieces. Inventory levels support supply chain planning and lead time optimization.

Q: Are all substitute parts RoHS3 compliant?

A: All identified substitute parts (ELM 2-285, H-101C, H-101C-1) maintain ROHS3 compliance status, matching the main part specification and ensuring regulatory alignment for applications requiring RoHS certification.