ELM 5-285 Equivalent & Substitute Parts

Part Overview

The ELM 5-285 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.285" (7.24mm) height. The component features a black PVC construction and accommodates 2-lead LED configurations. This part is currently Active in product status and maintains full ROHS3 compliance with MSL Level 1 rating.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category. Alternative models may be required due to inventory availability, manufacturing discontinuation, or specific application requirements where material or series variations are acceptable within the defined parameter set.

Substiute Parts

ELM 5-285

Bivar Inc.In Stock: 910ELM 5-285 Datasheet

Current PartRFQ

ELM 2-285

Bivar Inc.In Stock: 1981ELM 2-285 Datasheet

Parametric EquivalentRFQ

H-101C

Bivar Inc.In Stock: 22198H-101C Datasheet

Parametric EquivalentRFQ

H-101C-1

Bivar Inc.In Stock: 12044H-101C-1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 5-285 is determined by strict equivalence across the following parameters: LED type (T1), lead configuration (2-lead), physical height (0.285"/7.24mm), color (black), and compliance certifications (ROHS3, MSL Level 1).

The identified substitute parts maintain these core parameters while permitting variation in material composition (PVC versus Nylon) and manufacturer series designation. Material substitution between PVC and Nylon is permissible within this product category as both materials satisfy the mechanical and environmental requirements for LED standoff applications at the specified dimensions.

The following parts qualify as parametric equivalents:

• ELM 2-285 (PVC material, ELM 2 series)
• H-101C (Nylon material, H101C series)
• H-101C-1 (Nylon material, H101C series)

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain Active product status and full ROHS3 compliance, ensuring regulatory and supply chain continuity. Selection between PVC-based options (ELM 5-285, ELM 2-285) and Nylon-based options (H-101C, H-101C-1) depends on application-specific material requirements, as both material types satisfy the MSL Level 1 and EAR99 classifications.

The ELM 2-285 provides direct series substitution with identical material composition (PVC) to the ELM 5-285, differing only in series designation. The H-101C and H-101C-1 parts offer material alternatives with Nylon construction while maintaining all critical electrical and mechanical parameters. H-101C-1 represents a variant within the H101C series with equivalent specifications to H-101C.

Component selection should be based on material compatibility requirements within the target application and current inventory availability across the qualified substitute set.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-285 be used as a direct replacement for ELM 5-285?

A: Yes. The ELM 2-285 maintains identical specifications across all critical parameters: T1 LED type, 2-lead configuration, 0.285" height, black color, PVC material, and ROHS3 compliance. The parts differ only in series designation (ELM 2 versus ELM 5).

Q: What is the material difference between ELM 5-285 and the H-101C series?

A: The ELM 5-285 uses PVC material, while H-101C and H-101C-1 use Nylon. Both materials are qualified for this product category and maintain equivalent mechanical and environmental performance at the specified dimensions.

Q: Are H-101C and H-101C-1 interchangeable?

A: Yes. Both parts share identical specifications within the H101C series, including T1 LED type, 2-lead configuration, 0.285" height, black Nylon construction, and ROHS3 compliance.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. All identified substitutes maintain ROHS3 compliance, MSL Level 1 rating, and EAR99 ECCN classification, ensuring regulatory equivalence.

Q: What packaging format is used for all substitute parts?

A: All parts, including the main ELM 5-285 and all substitutes, are supplied in Bag packaging format.

Q: Can material substitution between PVC and Nylon affect PCB assembly processes?

A: Material selection should be evaluated against specific application requirements. Both PVC and Nylon materials are qualified for LED standoff applications at the specified dimensions and comply with all provided certifications.