ELM 5-040 Equivalent & Substitute Parts

Part Overview

The ELM 5-040 is a T1 LED standoff manufactured by Bivar Inc., constructed from black PVC material with a 0.040" (1.02mm) length specification. This component is designed for vertical mounting applications requiring precision LED alignment in compact assemblies. The part is currently Active in product status with full RoHS3 compliance and unlimited moisture sensitivity tolerance (MSL 1). Equivalent and substitute parts are identified when they maintain identical critical parameters including LED type, length dimension, material composition, and compliance certifications.

Substiute Parts

ELM 5-040

Bivar Inc.In Stock: 1146ELM 5-040 Datasheet

Current PartRFQ

ELM 4-1MM

Bivar Inc.In Stock: 1301ELM 4-1MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ELM 5-040 is permissible with the ELM 4-1MM based on the following critical parameter alignment:

Qualifying Parameters for Substitution:

• LED type: T1 (identical)
• Length: 0.040" (1.02mm) (identical)
• Material: Black PVC (identical)
• Color: Black (identical)
• Mounting orientation: Vertical (identical)
• RoHS3 compliance: Both parts maintain ROHS3 certification
• MSL rating: Both rated MSL 1 (Unlimited)
• HTSUS classification: Identical (3926.90.9985)

Both the primary part and substitute share the same base material composition and dimensional specifications that determine mechanical fit and electrical performance in T1 LED standoff applications. The parts are sourced from the same manufacturer, ensuring consistency in manufacturing standards and quality control.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 5-040 and ELM 4-1MM maintain Active product status with current manufacturing support. Both parts satisfy RoHS3 regulatory requirements and carry identical MSL 1 ratings, indicating unrestricted handling for moisture-sensitive device protection. Selection between these two parts may be determined by inventory availability: the ELM 5-040 currently maintains 1096 pieces in stock, while the ELM 4-1MM has 1213 pieces available. For applications requiring immediate fulfillment, either part satisfies the specified electrical and mechanical requirements without design modification or qualification testing.

Frequently Asked Questions (FAQ)

Q: What parameters determine whether the ELM 4-1MM can substitute for the ELM 5-040?

A: The substitute part must maintain identical T1 LED type, 0.040" (1.02mm) length dimension, black PVC material composition, and RoHS3 compliance certification. Both parts must be rated MSL 1 and sourced from Bivar Inc. to ensure manufacturing consistency.

Q: Are there any mechanical compatibility concerns when using ELM 4-1MM in place of ELM 5-040?

A: No compatibility concerns exist. Both parts share identical length, material, and color specifications. The vertical mounting orientation is consistent between both components, ensuring direct mechanical substitutability in existing circuit board layouts and assembly fixturing.

Q: Does the change from ELM 5 series to ELM 4 series affect compliance certifications?

A: No. Both parts maintain identical RoHS3 compliance status and MSL 1 ratings. Series designation does not affect regulatory standing or environmental classification for these components.

Q: Are there any inventory or lead-time considerations for selecting between these two parts?

A: Both parts are classified as Active with current manufacturing and distribution. The ELM 4-1MM currently has higher inventory availability (1213 units) compared to the ELM 5-040 (1096 units). For supply chain planning, either part provides equivalent fulfillment capability.

Q: What is the ECCN classification for these LED standoff components?

A: Both the ELM 5-040 and ELM 4-1MM are classified under ECCN category EAR99, requiring no export license authorization for standard commercial distribution channels.