ELM 4-530 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 4-530 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.530" (13.46mm) length specification. The part maintains Active product status and is ROHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity tolerance.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct functional replacement in applications where the primary part is unavailable or inventory constraints exist.

Substiute Parts

ELM 4-530

Bivar Inc.In Stock: 1162ELM 4-530 Datasheet

Current PartRFQ

ELM 2-510

Bivar Inc.In Stock: 1857ELM 2-510 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 4-530 is determined by the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 (mechanical form factor)
• Material: PVC (chemical compatibility and mechanical properties)
• Color: Black (visual and application consistency)
• Mounting Orientation: Vertical (functional orientation)
• RoHS Compliance: ROHS3 (regulatory requirement)
• MSL Rating: 1 or equivalent (environmental tolerance)

The ELM 2-510 qualifies as a parametric equivalent based on matching LED type (T1), material (PVC), color (Black), mounting orientation (Vertical), and compliance certifications (ROHS3, MSL 1). The length differential of 0.020" (0.51mm) between the ELM 4-530 (0.530") and ELM 2-510 (0.510") represents a minor mechanical variation within acceptable tolerance ranges for standoff applications where precise height specifications are not critical design constraints.

Parameter Comparison

Engineering Selection Recommendations

ELM 4-530 Primary Selection: Use the ELM 4-530 when the 0.530" (13.46mm) length specification is a design requirement. This part is Active status with full ROHS3 compliance and MSL 1 rating, supporting unrestricted deployment in standard industrial and commercial applications.

ELM 2-510 Substitute Selection: The ELM 2-510 serves as a functional substitute when the 0.020" (0.51mm) length reduction is acceptable within application tolerances. Both parts share identical LED type (T1), material (PVC), color (Black), and compliance certifications (ROHS3, MSL 1). The ELM 2-510 maintains Active product status and is manufactured by the same supplier (Bivar Inc.), ensuring consistent quality and reliability standards.

Compliance Assurance: Both parts satisfy ROHS3 regulatory requirements and carry MSL 1 ratings, eliminating compliance risk during substitution. Selection between these parts should be based solely on mechanical height requirements within the specific application circuit board layout.

Frequently Asked Questions (FAQ)

Q: Can the ELM 2-510 directly replace the ELM 4-530 in all applications?

A: The ELM 2-510 is functionally equivalent for T1 LED standoff applications requiring vertical mounting in PVC black construction. The 0.020" (0.51mm) length difference must be evaluated against specific application height constraints. If the circuit board layout or component clearance specifications require the exact 0.530" dimension, the ELM 4-530 is the appropriate selection.

Q: Are there compliance or environmental differences between these parts?

A: No. Both the ELM 4-530 and ELM 2-510 carry identical ROHS3 compliance certification and MSL 1 (Unlimited) moisture sensitivity ratings. Environmental and regulatory deployment conditions are equivalent.

Q: What is the significance of the Series designation (ELM 4 vs. ELM 2)?

A: The Series designation indicates the product line within Bivar Inc.'s standoff portfolio. The ELM 4 and ELM 2 series share common mechanical and material specifications but differ in specific dimensional parameters, including length. Series designation does not affect functional compatibility for T1 LED standoff applications.

Q: How should packaging be considered during substitution?

A: Both parts are supplied in Bag packaging format. Inventory quantities differ (ELM 4-530: 1069 Pcs; ELM 2-510: 1846 Pcs), but packaging type remains consistent. No special handling or storage modifications are required when transitioning between these parts.

Q: Are there any electrical parameter differences?

A: No electrical parameters are specified for these mechanical standoff components. Both parts function identically as passive mechanical supports for T1 LED form factors. Electrical performance is determined by the LED component itself, not the standoff.