ELM 4-490 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 4-490 is a T1 LED standoff manufactured by Bivar Inc., featuring a 0.490" (12.45mm) black PVC body for vertical mounting applications with 3mm LED formats and 2-lead configurations. This part is currently active in production and ROHS3 compliant. Finding substitute parts becomes necessary when managing supply chain variability, accommodating minor dimensional tolerances in PCB layouts, or optimizing inventory across equivalent designs.

Substiute Parts

ELM 4-490

Bivar Inc.In Stock: 1040ELM 4-490 Datasheet

Current PartRFQ

ELM 2-500

Bivar Inc.In Stock: 4576ELM 2-500 Datasheet

Parametric EquivalentRFQ

ELM 2-510

Bivar Inc.In Stock: 1857ELM 2-510 Datasheet

Parametric EquivalentRFQ

ELM 5-485

Bivar Inc.In Stock: 10104ELM 5-485 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ELM 4-490 is determined by alignment across the following critical parameters:

• LED Type: All substitutes must be T1 format
• Color: All substitutes must be black PVC material
• Length (Height): Substitutes range from 0.485" to 0.510", representing acceptable variations within standard PCB mounting tolerances
• Material & Construction: All substitutes maintain identical PVC construction and 2-lead configuration
• Compliance: All substitutes maintain ROHS3 compliance and MSL 1 rating

Three approved substitutes exist within the ELM product family, each within the same manufacturing standard and electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts share identical active product status and ROHS3 compliance certification with the primary part ELM 4-490. Selection among the four available options depends on dimensional requirements within the PCB mounting specification:

• ELM 5-485 (0.485"): Shortest option, 0.005" below primary part
• ELM 4-490 (0.490"): Primary specification
• ELM 2-500 (0.500"): Moderate height, 0.010" above primary part
• ELM 2-510 (0.510"): Tallest option, 0.020" above primary part

All parts are manufactured by Bivar Inc. with identical electrical performance and mounting characteristics. Parts are produced to equivalent mechanical tolerances and share the same ECCN (EAR99) and HTSUS classification, ensuring regulatory compatibility across procurement and supply scenarios.

Frequently Asked Questions (FAQ)

Q: What is the maximum height difference allowed between ELM 4-490 and its substitutes? A: The substitute parts range from 0.485" to 0.510", representing a total spread of 0.025" around the primary part's 0.490" specification. Selection should confirm PCB mounting clearance and LED positioning requirements within the end application.

Q: Are all substitute parts electrically equivalent to the ELM 4-490? A: All four parts are T1 LED standoffs with identical electrical performance. Differences are purely mechanical, involving the mounting height and base series designation within the ELM product family.

Q: Can ELM 2-510 substitute for ELM 4-490 in all applications? A: ELM 2-510 shares all critical compliance certifications and manufacturing standards. Suitability depends on whether the 0.020" height difference fits the PCB layout and mechanical constraints of the specific application.

Q: What is the current inventory status of these parts? A: ELM 4-490: 1009 pcs; ELM 2-500: 4519 pcs; ELM 2-510: 1846 pcs; ELM 5-485: 10054 pcs.

Q: Are there packaging differences between the substitute parts? A: All parts are supplied in identical bag packaging, maintaining consistent handling and storage requirements.

This page is ready to paste directly into a web Markdown editor. Would you like any adjustments to the content or structure?