ELM 4-230 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 4-230 is a T1 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.230" (5.84mm) length. This component is classified as an active product and serves as a mechanical mounting solution for T1 LED assemblies in vertical orientation. Substitute parts become necessary when the primary part experiences inventory constraints, extended lead times, or when design specifications allow for minor dimensional variations within acceptable tolerances.

Substiute Parts

ELM 4-230

Bivar Inc.In Stock: 1180ELM 4-230 Datasheet

Current PartRFQ

ELM 4-6MM

Bivar Inc.In Stock: 1817ELM 4-6MM Datasheet

Parametric EquivalentRFQ

ELM 5-235

Bivar Inc.In Stock: 20480ELM 5-235 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 4-230 is determined by the following parameters: LED type (T1), material composition (black PVC), orientation (vertical), and regulatory compliance (ROHS3). The substitute parts identified—ELM 4-6MM and ELM 5-235—maintain compatibility across these core criteria. Length variations between 0.230" and 0.240" represent minor dimensional differences that fall within the mechanical tolerance envelope for T1 LED standoff applications. All substitute parts retain identical material properties, color specification, and compliance certifications, ensuring functional interchangeability in standard mounting applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ELM 4-230, ELM 4-6MM, and ELM 5-235—maintain active product status with full ROHS3 compliance and MSL 1 rating. Selection between these parts is based on length requirements and inventory availability. The ELM 4-230 operates at 0.230" (5.84mm), the ELM 4-6MM at 0.240" (6.10mm), and the ELM 5-235 at 0.235" (5.97mm). Applications requiring the shortest standoff height should specify ELM 4-230. Applications tolerating the maximum length variation should specify ELM 4-6MM. The ELM 5-235 provides an intermediate length option. All parts are suitable for direct substitution where dimensional tolerance permits.

Frequently Asked Questions (FAQ)

Q: Can ELM 4-6MM be used as a direct replacement for ELM 4-230?

A: ELM 4-6MM is a functional equivalent with identical material, color, LED type, and compliance certifications. The length difference is 0.010" (0.26mm). Substitution is valid only if the application design permits this dimensional variation.

Q: What is the primary difference between ELM 4-230 and ELM 5-235?

A: Both parts are T1 LED standoffs in black PVC with identical compliance ratings. The ELM 5-235 is 0.005" (0.13mm) longer. The series designation differs (ELM 4 versus ELM 5), but functional performance remains equivalent for standard mounting applications.

Q: Are all substitute parts available in the same packaging format?

A: All three parts are supplied in bag packaging. Inventory levels vary: ELM 4-230 has 1,107 pieces, ELM 4-6MM has 1,737 pieces, and ELM 5-235 has 20,398 pieces in stock.

Q: Do the substitute parts carry the same regulatory certifications?

A: Yes. All three parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, ensuring equivalent regulatory standing for applications requiring these certifications.

Q: What determines whether a substitute part is acceptable for my application?

A: Substitution eligibility is determined by: LED type (T1), material (black PVC), color (black), orientation (vertical), and length tolerance. If your design permits the length variation between 0.230" and 0.240", any of the three parts are functionally interchangeable.