ELM 3-800 Equivalent & Substitute Parts

Part Overview

The ELM 3-800 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.800" (20.32mm) length specification. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments. Identification of equivalent substitute parts becomes necessary when managing inventory constraints, addressing supply chain disruptions, or optimizing component procurement across manufacturing operations.

Substiute Parts

ELM 3-800

Bivar Inc.In Stock: 1232ELM 3-800 Datasheet

Current PartRFQ

ELM 1-820

Bivar Inc.In Stock: 2082ELM 1-820 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 3-800 is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• LED Type: T1 3/4 (physical form factor)
• Material: Black PVC (construction material)
• Mounting Orientation: Vertical (application requirement)
• Manufacturer: Bivar Inc. (design consistency)
• RoHS Compliance: ROHS3 Compliant (regulatory requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (environmental rating)

Allowable Variance:

• Length tolerance: Dimensional variation within mechanical design constraints of the host assembly

The ELM 1-820 qualifies as a parametric equivalent based on matching LED type, material composition, mounting orientation, manufacturer origin, and compliance certifications. The length differential of 0.020" (0.51mm) represents a measurable but allowable variance within standard mechanical tolerances for LED standoff applications.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 3-800 and ELM 1-820 maintain Active product status within the Bivar Inc. portfolio, ensuring continued manufacturing support and supply availability. Both components satisfy ROHS3 compliance requirements, supporting regulatory obligations in restricted substance management. The Moisture Sensitivity Level 1 (Unlimited) rating on both parts indicates equivalent environmental performance characteristics.

Selection between these parts should be based on specific mechanical design requirements of the host assembly. The 0.020" (0.51mm) length differential must be evaluated against circuit board layout constraints, component clearance specifications, and vertical standoff height requirements. Both parts are supplied in identical Bag packaging format, supporting equivalent handling and storage protocols.

Frequently Asked Questions (FAQ)

Q: What determines whether ELM 1-820 can substitute for ELM 3-800?

A: Substitution is valid when the host assembly design accommodates the 0.020" (0.51mm) length increase. The LED type (T1 3/4), material (Black PVC), mounting orientation (Vertical), and compliance certifications (ROHS3, MSL 1) are identical between both parts, establishing functional equivalence.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts carry identical ROHS3 compliance status and Moisture Sensitivity Level 1 (Unlimited) ratings. Both are manufactured by Bivar Inc. and maintain Active product status.

Q: How does the 0.020" length difference affect component selection?

A: The length variance must be evaluated within the mechanical design envelope of the specific application. Vertical standoff height, circuit board clearance, and component spacing requirements determine whether this dimensional difference is acceptable. Engineering review of the host assembly design is necessary to confirm compatibility.

Q: What packaging considerations apply to both parts?

A: Both ELM 3-800 and ELM 1-820 are supplied in Bag packaging format, supporting identical receiving, storage, and handling procedures.

Q: Can these parts be used interchangeably in all applications?

A: Interchangeability is limited to applications where the mechanical design accommodates the length differential. The identical LED type, material, mounting orientation, and compliance characteristics support functional equivalence, but dimensional fit must be confirmed for each specific assembly design.