ELM 3-465 Equivalent & Substitute Parts

Part Overview

The ELM 3-465 is a T1 3/4 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.465" (11.81mm) vertical height. This component is designed for LED mounting applications requiring precise spacing and alignment. The part maintains Active product status and carries ROHS3 compliance certification. Finding equivalent parts becomes necessary when stock availability requires alternative sources or when height specifications allow for tolerance variations within the mechanical envelope constraints.

Substiute Parts

ELM 3-465

Bivar Inc.In Stock: 1159ELM 3-465 Datasheet

Current PartRFQ

ELM 3-450

Bivar Inc.In Stock: 9053ELM 3-450 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 3-450 qualifies as a direct parametric equivalent based on the following matching criteria:

• LED Type Match: Both parts accommodate T1 3/4 LED form factors
• Material Match: Both utilize black PVC construction
• Series Match: Both belong to the ELM 3 product series
• Compliance Match: Both maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity levels
• Mechanical Tolerance: The length variation of 0.015" (0.38mm) between 0.465" and 0.450" falls within standard mechanical tolerances for LED standoff applications

The substitution relationship is established through mechanical height compatibility within the ELM 3 series specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 3-465 and ELM 3-450 maintain identical product status (Active) and comply with ROHS3 requirements. Selection between these parts should be based on mechanical envelope requirements. The ELM 3-450 provides 0.015" less vertical height, making it suitable for applications with tighter vertical clearances. The ELM 3-465 offers increased standoff height for applications requiring greater separation distance. Both parts carry MSL 1 (Unlimited) moisture sensitivity classification and equivalent packaging specifications. The choice depends solely on the height specification requirements of your mechanical design.

Frequently Asked Questions (FAQ)

Q: Can the ELM 3-450 be used as a direct replacement for the ELM 3-465? A: The ELM 3-450 is mechanically compatible within the ELM 3 series. The 0.015" (0.38mm) length difference must be evaluated against your application's vertical clearance and alignment specifications. Both parts maintain identical LED type, material composition, and compliance certifications.

Q: What is the primary difference between these parts? A: The sole differentiating parameter is physical length. The ELM 3-465 measures 0.465" (11.81mm) while the ELM 3-450 measures 0.450" (11.43mm). All other electrical and mechanical specifications remain identical.

Q: Are these parts interchangeable in terms of RoHS compliance? A: Yes. Both parts carry ROHS3 compliance designation, making them functionally equivalent from a regulatory standpoint for applications requiring RoHS certification.

Q: What packaging format is supplied for these parts? A: Both parts are supplied in bag packaging format. Standard inventory quantities are available for both SKUs.

Q: Do both parts use the same material composition? A: Yes. Both the ELM 3-465 and ELM 3-450 use black PVC material construction, ensuring identical chemical resistance and environmental performance characteristics.