ELM 3-360 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 3-360 is a T1 3/4 LED standoff manufactured by Bivar Inc., featuring a black PVC body with a height of 0.360" (9.14mm). This component is classified as active status and maintains full RoHS3 compliance. LED standoffs are utilized in circuit board assemblies where vertical PCB-to-component spacing and positioning are critical design parameters. Substitute parts become necessary when inventory constraints exist, when design specifications allow tolerance in height dimensions, or when alternative series products meet identical functional requirements while maintaining compliance certifications.

Substiute Parts

ELM 3-360

Bivar Inc.In Stock: 1161ELM 3-360 Datasheet

Current PartRFQ

ELM 1-350

Bivar Inc.In Stock: 12886ELM 1-350 Datasheet

Parametric EquivalentRFQ

ELM 3-370

Bivar Inc.In Stock: 939ELM 3-370 Datasheet

Parametric EquivalentRFQ

ELM 3-375

Bivar Inc.In Stock: 8887ELM 3-375 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 3-360 is determined by strict conformance to the following parameters: LED type (T1 3/4), material composition (black PVC), RoHS3 compliance status, and height tolerance. The primary substitution criterion is height dimension, with acceptable variations within standard PCB design tolerances. All substitute parts maintain identical electrical and material characteristics, differing only in specified height dimensions. The ELM 1-350, ELM 3-370, and ELM 3-375 are classified as parametric equivalents based on shared LED configuration, PVC construction, color specification, and full regulatory compliance alignment.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts are classified as active status components with full RoHS3 compliance certification. Selection between the ELM 3-360 and alternative parts is based on mechanical height requirements as specified in circuit board design documentation. ELM 1-350 provides reduced height at 0.350" and operates within the ELM 1 series designation. ELM 3-370 and ELM 3-375 provide incremental height increases of 0.010" and 0.015" respectively, maintaining the ELM 3 series architecture. All parts satisfy identical regulatory requirements (EAR99 classification) and moisture sensitivity specifications (MSL 1). Component selection must be cross-referenced against mechanical drawing requirements for PCB mounting height and clearance specifications.

Frequently Asked Questions (FAQ)

Q: What is the primary substitution criterion for ELM 3-360? A: Height dimension tolerance. The ELM 3-360 specifies 0.360" (9.14mm), with acceptable substitutes ranging from 0.350" to 0.375" based on PCB design requirements.

Q: Are all substitute parts equivalent in terms of regulatory compliance? A: Yes. All listed substitute parts maintain ROHS3 compliance, EAR99 ECCN classification, and MSL 1 moisture sensitivity rating identical to the main part specification.

Q: What is the difference between ELM 1-350 and ELM 3 series parts? A: ELM 1-350 belongs to the ELM 1 series and provides a reduced height of 0.350" (8.89mm). ELM 3-370 and ELM 3-375 maintain the ELM 3 series designation with heights of 0.370" (9.40mm) and 0.375" (9.53mm) respectively. All share identical LED type, material, and color specifications.

Q: Can I use a substitute part without design modification? A: Substitution is valid only when circuit board mechanical specifications allow the height variation. PCB design documentation must be consulted to confirm tolerance acceptance for the selected substitute height dimension.

Q: Are packaging specifications identical across all parts? A: Yes. All parts are supplied in bag packaging format.