ELM 3-230 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 3-230 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.230" (5.84mm) length specification. This component is constructed from black PVC material and accommodates standard T1 3/4 LED packages. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments.

Equivalent and substitute parts become necessary when the primary part experiences inventory constraints, extended lead times, or when design flexibility permits minor dimensional variations within acceptable tolerances. The substitute parts listed below maintain functional compatibility through matching LED form factor, color, material composition, and compliance certifications.

Substiute Parts

ELM 3-230

Bivar Inc.In Stock: 1122ELM 3-230 Datasheet

Current PartRFQ

909-235 BK

Bivar Inc.In Stock: 37915909-235 BK Datasheet

Parametric EquivalentRFQ

ELM 1-220

Bivar Inc.In Stock: 1649ELM 1-220 Datasheet

Parametric EquivalentRFQ

ELM 1-6MM

Bivar Inc.In Stock: 8933ELM 1-6MM Datasheet

Parametric EquivalentRFQ

ELM 3-235

Bivar Inc.In Stock: 8324ELM 3-235 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 3-230 is determined by the following critical parameters:

Primary Compatibility Criteria:

• LED Form Factor: T1 3/4 (mandatory match)
• Color: Black (mandatory match)
• RoHS Status: ROHS3 Compliant (mandatory match)
• Moisture Sensitivity Level: 1 (Unlimited) (mandatory match)

Secondary Compatibility Criteria:

• Length tolerance: 0.220" to 0.240" (±0.010" variation acceptable)
• Material: PVC or Nylon (both acceptable for mechanical mounting)
• Mounting orientation: Vertical

The four substitute parts listed below satisfy all primary compatibility criteria. Length variations among substitutes reflect minor dimensional differences that remain functionally equivalent for standard LED mounting applications. Material variations between PVC and Nylon do not affect electrical performance or mechanical mounting compatibility.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts maintain Active product status and ROHS3 compliance, confirming their suitability for current production applications. Selection among these equivalents should be based on the following factors:

909-235 BK: This substitute offers the highest current inventory (37,872 pcs) and represents the most readily available option. The material composition differs (Nylon vs. PVC), but both materials provide equivalent mechanical mounting performance for T1 3/4 LED applications. Length variation of +0.005" (5.97mm vs. 5.84mm) falls within acceptable tolerance for standard mounting applications.

ELM 1-220: This substitute provides the closest length specification to the primary part, with a -0.010" variation (5.59mm). Material composition remains PVC, matching the original specification. Inventory availability is moderate at 1,594 pcs.

ELM 1-6MM: This substitute offers the longest length specification at 0.240" (6.10mm), representing a +0.010" variation. PVC material composition matches the primary part. Inventory availability is strong at 8,834 pcs.

ELM 3-235: This substitute maintains identical series designation (ELM 3) and material composition (PVC) as the primary part. Length variation is +0.005" (5.97mm). Inventory availability is substantial at 8,252 pcs.

Frequently Asked Questions (FAQ)

Q: Can ELM 3-230 be directly replaced with 909-235 BK?

A: Yes. Both parts accommodate T1 3/4 LED form factors, maintain black color specification, achieve ROHS3 compliance, and share identical MSL ratings. The material difference (Nylon vs. PVC) does not affect mechanical mounting compatibility. Length variation of +0.005" remains within functional tolerance for vertical LED mounting applications.

Q: What is the maximum acceptable length variation for substitution?

A: Length variations of ±0.010" (0.220" to 0.240") are functionally equivalent for T1 3/4 LED standoff applications. All listed substitutes fall within this tolerance range.

Q: Are PVC and Nylon materials interchangeable for this application?

A: Yes. Both materials provide equivalent mechanical mounting performance for T1 3/4 LED standoffs. Material selection does not affect electrical performance or standard mounting compatibility.

Q: Which substitute offers the best inventory availability?

A: The 909-235 BK substitute maintains the highest current inventory at 37,872 pcs, providing the most immediate availability for production requirements.

Q: Do all substitutes maintain the same compliance certifications?

A: Yes. All substitute parts are ROHS3 compliant with MSL rating of 1 (Unlimited), matching the primary part's compliance profile.

Q: Can multiple substitutes be used interchangeably within the same assembly?

A: Yes. All listed substitutes maintain functional equivalence through matching LED form factor, color, compliance certifications, and length tolerances. Multiple substitutes can be used within the same production run without affecting assembly compatibility.