ELM 3-205 Equivalent & Substitute Parts

Part Overview

The ELM 3-205 is a T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.205" (5.21mm) length specification. This component is constructed from black PVC material and is classified as Active product status. Substitute parts become necessary when the primary part experiences inventory constraints, extended lead times, or when design flexibility permits dimensional tolerance within the specified parameter range.

Substiute Parts

ELM 3-205

Bivar Inc.In Stock: 847ELM 3-205 Datasheet

Current PartRFQ

ELM 1-200

Bivar Inc.In Stock: 759ELM 1-200 Datasheet

Parametric EquivalentRFQ

0035.9206

SCHURTER Inc.In Stock: 30690035.9206 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 3-205 is determined by the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 3/4 (mandatory match)
• Mounting Orientation: Vertical (mandatory match)
• Material: Black PVC or equivalent (mandatory match)
• Length Tolerance: 0.200" to 0.205" (5.08mm to 5.21mm)
• RoHS Compliance: ROHS3 Compliant (mandatory match)

The identified substitute parts maintain compatibility across these core parameters. Length variations within the 0.200" to 0.205" range are acceptable for T1 3/4 LED standoff applications, as this tolerance band reflects standard mechanical compatibility for vertical mounting configurations.

Parameter Comparison

Engineering Selection Recommendations

ELM 1-200 (Bivar Inc.): This substitute maintains identical LED type, mounting orientation, material composition, and RoHS compliance. The length differential of 0.005" (0.13mm) falls within acceptable mechanical tolerance for T1 3/4 standoff applications. Both parts are manufactured by the same supplier and carry Active product status with equivalent MSL ratings.

0035.9206 (SCHURTER Inc.): This substitute meets all critical substitution parameters: T1 3/4 LED type, vertical mounting, black color, and ROHS3 compliance. The length specification of 0.201" (5.10mm) represents a 0.004" (0.11mm) variance from the primary part, which is within standard mechanical tolerance. Material composition is not specified in available documentation. Inventory availability is significantly higher at 3031 pieces.

All three parts carry Active product status and ROHS3 compliance certification, confirming suitability for current design requirements.

Frequently Asked Questions (FAQ)

Q: Can ELM 1-200 be used as a direct replacement for ELM 3-205?

A: Yes. Both parts share identical LED type (T1 3/4), mounting orientation (vertical), material (black PVC), and RoHS compliance. The length difference of 0.005" (0.13mm) is within acceptable mechanical tolerance for vertical LED standoff applications.

Q: What is the maximum acceptable length variation for substitution?

A: For T1 3/4 LED standoffs in vertical mounting configuration, length variations between 0.200" and 0.205" (5.08mm to 5.21mm) are acceptable. This range reflects standard mechanical compatibility for this component category.

Q: Is 0035.9206 from SCHURTER Inc. compatible with ELM 3-205?

A: Yes. The 0035.9206 meets all critical parameters: T1 3/4 LED type, vertical mounting, black color, ROHS3 compliance, and length specification of 0.201" (5.10mm), which falls within the acceptable tolerance band.

Q: Are there any compliance differences between the three parts?

A: All three parts are ROHS3 compliant and carry Active product status. ELM 3-205 and ELM 1-200 both specify MSL 1 (Unlimited). The 0035.9206 lists MSL as Not Applicable, which does not affect substitution eligibility for this component type.

Q: Which substitute offers the best inventory availability?

A: The 0035.9206 (SCHURTER Inc.) currently maintains the highest inventory level at 3031 pieces, compared to 798 pieces for ELM 3-205 and 749 pieces for ELM 1-200.

Q: Do all three parts use identical packaging?

A: All three parts are supplied in Bag packaging format, ensuring consistent handling and storage requirements.