ELM 2-895 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-895 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.895" (22.73mm) length. This component is constructed from black PVC material and accommodates 3MM LED packages with 2-lead configurations. The part maintains Active product status and is ROHS3 compliant, making it suitable for current production environments.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct functional replacement in circuit designs and assembly processes.

Substiute Parts

ELM 2-895

Bivar Inc.In Stock: 737ELM 2-895 Datasheet

Current PartRFQ

ELM 5-23MM

Bivar Inc.In Stock: 7185ELM 5-23MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 2-895 is determined by the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 (fixed requirement)
• LED Package Size: 3MM (fixed requirement)
• Lead Configuration: 2-Lead (fixed requirement)
• Material: Black PVC (fixed requirement)
• Mounting Orientation: Vertical (fixed requirement)
• RoHS Compliance: ROHS3 Compliant (fixed requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (fixed requirement)

Secondary Consideration:

• Length tolerance: Mechanical length variations within acceptable assembly parameters

The ELM 5-23MM qualifies as a parametric equivalent based on matching all primary substitution criteria. The length differential of 0.015" (0.38mm) between the ELM 2-895 (0.895") and ELM 5-23MM (0.910") represents a minor mechanical variation that does not affect electrical performance or functional compatibility in standard vertical LED mounting applications.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-895 Primary Selection: Select the ELM 2-895 when the exact 0.895" (22.73mm) length specification is required by circuit board layout, mechanical assembly constraints, or design documentation.

ELM 5-23MM Substitute Selection: The ELM 5-23MM serves as a functional equivalent when the 0.015" (0.38mm) length increase is accommodated within mechanical tolerances and assembly requirements. Both parts maintain identical electrical characteristics, material composition, and regulatory compliance status. The ELM 5-23MM is available in higher inventory quantity (7087 Pcs vs. 709 Pcs), providing supply chain advantages for high-volume production scenarios.

Compliance Assurance: Both parts satisfy ROHS3 compliance requirements and carry MSL 1 (Unlimited) moisture sensitivity ratings, ensuring compatibility with standard manufacturing and storage environments without specialized handling protocols.

Frequently Asked Questions (FAQ)

Q: Can the ELM 5-23MM directly replace the ELM 2-895 in my assembly?

A: The ELM 5-23MM functions as a direct parametric equivalent for all electrical and material specifications. The 0.015" (0.38mm) length difference must be evaluated against your mechanical assembly tolerances and PCB layout requirements. If your design accommodates this length variation, substitution is valid.

Q: Are there electrical performance differences between these parts?

A: No. Both parts are T1 LED standoffs with identical 3MM LED package accommodation and 2-lead configuration. Electrical performance characteristics are equivalent.

Q: Do both parts require the same handling and storage conditions?

A: Yes. Both parts carry MSL 1 (Unlimited) moisture sensitivity ratings and ROHS3 compliance. Standard component storage and handling procedures apply to both without differentiation.

Q: What is the primary reason to choose ELM 5-23MM over ELM 2-895?

A: Supply availability. The ELM 5-23MM maintains significantly higher inventory levels (7087 Pcs vs. 709 Pcs), supporting extended production runs and reducing lead time risk.

Q: Are these parts interchangeable in terms of packaging?

A: Yes. Both parts are supplied in Bag packaging format with identical handling and distribution characteristics.

Q: What mechanical tolerance should I apply when evaluating the 0.015" length difference?

A: This determination depends on your specific PCB layout, mounting hole spacing, and mechanical assembly design. Consult your mechanical design documentation to confirm whether this variation falls within acceptable tolerances for your application.