ELM 2-610 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-610 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications with a 0.610" (15.50mm) length. This component features a black PVC construction and accommodates 2-lead configurations. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent functional performance can be achieved through alternative models within the same product family while maintaining critical electrical and mechanical parameters. The ELM 2-610 has one identified substitute based on parametric compatibility.

Substiute Parts

ELM 2-610

Bivar Inc.In Stock: 695ELM 2-610 Datasheet

Current PartRFQ

ELM 4-600

Bivar Inc.In Stock: 1069ELM 4-600 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 4-600 qualifies as a parametric equivalent to the ELM 2-610 based on the following matching criteria:

Matching Parameters:

• Manufacturer: Bivar Inc.
• LED Type: T1
• Material: PVC
• Color: Black
• Lead Configuration: 2-Lead
• Mounting Orientation: Vertical
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• Product Status: Active

Dimensional Variance: The primary difference between these parts is the standoff length. The ELM 2-610 provides 0.610" (15.50mm) height, while the ELM 4-600 provides 0.600" (15.24mm) height, representing a 0.010" (0.26mm) reduction. This dimensional tolerance falls within acceptable mechanical substitution parameters for applications where precise standoff height is not a critical constraint.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 2-610 and ELM 4-600 maintain Active product status with full ROHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts depends on the specific standoff height requirement for the application.

The ELM 2-610 is the primary choice when 0.610" (15.50mm) standoff height is specified. The ELM 4-600 serves as a substitute when the 0.010" (0.26mm) height reduction is acceptable within the mechanical design constraints. Both parts share identical electrical characteristics, material composition, and environmental compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the ELM 4-600 directly replace the ELM 2-610 in all applications?

A: The ELM 4-600 can replace the ELM 2-610 when the 0.010" (0.26mm) reduction in standoff height does not affect circuit board clearance, component spacing, or mechanical assembly requirements. Applications with tight vertical constraints may require verification of the reduced height.

Q: Are there electrical performance differences between these parts?

A: No. Both parts are T1 LED standoffs with identical electrical specifications, material composition, and lead configurations. Differences are limited to physical standoff length.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the ELM 2-610 and ELM 4-600 are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Both carry identical ECCN (EAR99) and HTSUS (3926.90.9985) classifications.

Q: What is the significance of the series designation change from ELM 2 to ELM 4?

A: The series designation reflects the product family grouping within Bivar Inc.'s catalog. The ELM 2 and ELM 4 series share identical functional characteristics and are differentiated primarily by standoff length specifications.

Q: Are both parts available in equivalent quantities?

A: Inventory levels differ between parts. The ELM 2-610 has 666 pieces in stock, while the ELM 4-600 has 1058 pieces available. Availability should be confirmed at the time of procurement.