ELM 2-485 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-485 is a T1 LED standoff manufactured by Bivar Inc., featuring a vertical surface-mount configuration with black PVC construction. The part measures 0.485" (12.32mm) in length and is designed for LED mounting applications. This component is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct functional replacement in circuit designs, particularly when inventory availability or lead time considerations necessitate alternative sourcing.

Substiute Parts

ELM 2-485

Bivar Inc.In Stock: 1151ELM 2-485 Datasheet

Current PartRFQ

ELM 2-500

Bivar Inc.In Stock: 4576ELM 2-500 Datasheet

Parametric EquivalentRFQ

ELM 5-485

Bivar Inc.In Stock: 10104ELM 5-485 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 2-485 are qualified based on the following critical parameters:

Primary Substitution Criteria:

• LED Type: T1 (maintained across all substitutes)
• Material: Black PVC (maintained across all substitutes)
• Manufacturer: Bivar Inc. (maintained across all substitutes)
• Configuration: Vertical Surface-Mount (maintained across all substitutes)
• RoHS Compliance: ROHS3 (maintained across all substitutes)
• MSL Rating: 1 (Unlimited) (maintained across all substitutes)
• Product Status: Active (maintained across all substitutes)

Variable Parameters Allowing Substitution:

• Length: 0.485" (12.32mm) or 0.500" (12.70mm)
• Series: ELM 2 or ELM 5

The ELM 2-485 has two identified substitutes: ELM 2-500 (same series, different length) and ELM 5-485 (different series, same length). Both maintain all critical electrical and mechanical compatibility parameters.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-500 Substitution: The ELM 2-500 maintains identical series designation (ELM 2) and all critical compliance parameters. The length differential of 0.015" (0.38mm) represents the primary design consideration. This substitute is appropriate when mechanical envelope constraints permit the increased standoff height and when ELM 2 series consistency is required.

ELM 5-485 Substitution: The ELM 5-485 maintains identical length specification (0.485") and all critical compliance parameters. The series change from ELM 2 to ELM 5 represents the primary design consideration. This substitute is appropriate when length-critical applications require the ELM 5 series alternative.

Both substitutes carry active product status and full ROHS3 compliance, supporting long-term supply chain reliability.

Frequently Asked Questions (FAQ)

Q: What determines if ELM 2-500 can replace ELM 2-485? A: The ELM 2-500 shares all critical parameters (LED type, material, configuration, compliance ratings) with the ELM 2-485. The 0.015" length increase must be evaluated against specific mechanical envelope requirements in the application circuit.

Q: What determines if ELM 5-485 can replace ELM 2-485? A: The ELM 5-485 maintains identical length and all critical electrical and mechanical parameters. The series designation change from ELM 2 to ELM 5 must be evaluated for any application-specific series requirements.

Q: Are all substitutes ROHS3 compliant? A: Yes. Both ELM 2-500 and ELM 5-485 carry ROHS3 compliance certification, matching the ELM 2-485 specification.

Q: What is the MSL rating for these parts? A: All three parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Q: Are these parts currently in production? A: Yes. The ELM 2-485, ELM 2-500, and ELM 5-485 all maintain active product status with Bivar Inc.

Q: What packaging format is used? A: All parts are supplied in bag packaging format.