ELM 2-465 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-465 is a T1 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.465" (11.81mm) vertical mounting height. This component is classified as an active product and serves as a mechanical support and alignment fixture for T1 LED packages in vertical surface-mount applications. The need to identify equivalent and substitute parts arises from inventory availability, lead time considerations, or specific application requirements where alternative standoff heights or series configurations may be acceptable within design tolerances.

Substiute Parts

ELM 2-465

Bivar Inc.In Stock: 1219ELM 2-465 Datasheet

Current PartRFQ

ELM 5-485

Bivar Inc.In Stock: 10104ELM 5-485 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the ELM 2-465 is permissible with the ELM 5-485 based on the following alignment of critical parameters:

Common Substitution Criteria:

• LED Type: Both parts accommodate T1 LED packages
• Material Composition: Both utilize black PVC construction
• Mounting Configuration: Both are vertical surface-mount standoffs
• Product Status: Both are active products
• RoHS Compliance: Both meet ROHS3 Compliant standards
• Moisture Sensitivity Level: Both are classified as MSL 1 (Unlimited)
• Manufacturer: Both are manufactured by Bivar Inc.

Dimensional Variance: The primary difference between these parts is the standoff length. The ELM 2-465 provides 0.465" (11.81mm) height, while the ELM 5-485 provides 0.485" (12.32mm) height. This 0.020" (0.51mm) dimensional difference represents a 4.3% increase in standoff height and must be evaluated against specific application clearance and alignment requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 2-465 and ELM 5-485 are active products with identical RoHS3 compliance and MSL 1 ratings, making them functionally equivalent from a regulatory and environmental standpoint. Selection between these parts should be based on the specific standoff height requirement of the application. The ELM 2-465 is appropriate for designs requiring a 0.465" (11.81mm) vertical clearance, while the ELM 5-485 accommodates applications requiring 0.485" (12.32mm) clearance. Both parts maintain identical material composition, LED accommodation specifications, and moisture sensitivity characteristics, ensuring consistent performance in equivalent environmental conditions.

Frequently Asked Questions (FAQ)

Q: Can the ELM 5-485 be used as a direct replacement for the ELM 2-465?

A: The ELM 5-485 can be substituted for the ELM 2-465 only if the application design permits a 0.020" (0.51mm) increase in standoff height. Both parts share identical LED type, material, mounting style, and compliance certifications. Dimensional tolerance analysis of the specific application is required to confirm compatibility.

Q: What is the primary difference between these two standoff parts?

A: The primary difference is the standoff length. The ELM 2-465 measures 0.465" (11.81mm), while the ELM 5-485 measures 0.485" (12.32mm). All other specifications, including LED type, material, mounting configuration, and regulatory compliance, are identical.

Q: Are both parts RoHS compliant?

A: Yes, both the ELM 2-465 and ELM 5-485 are ROHS3 Compliant and carry an MSL 1 (Unlimited) moisture sensitivity rating, making them suitable for equivalent environmental and regulatory applications.

Q: What does the series designation (ELM 2 versus ELM 5) indicate?

A: The series designation reflects the product line within Bivar Inc.'s LED standoff portfolio. The ELM 2 series and ELM 5 series represent different design families, with the primary distinguishing characteristic being the standoff height specification.

Q: Are there any packaging differences between these parts?

A: Both parts are supplied in bag packaging. Inventory levels differ, with the ELM 2-465 having 1112 pieces and the ELM 5-485 having 10054 pieces available in stock.