ELM 2-460 Equivalent & Substitute Parts

Part Overview

The ELM 2-460 is a T1 LED standoff manufactured by Bivar Inc. in black PVC material with a length of 0.460" (11.68mm). This component is classified as an active product with full ROHS3 compliance. Finding equivalent substitute parts is necessary when the primary specification is unavailable in inventory, when procurement lead times exceed project requirements, or when design flexibility allows for dimensional or series variation while maintaining functional compatibility within defined electrical and mechanical tolerances.

Substiute Parts

ELM 2-460

Bivar Inc.In Stock: 737ELM 2-460 Datasheet

Current PartRFQ

ELM 4-440

Bivar Inc.In Stock: 1072ELM 4-440 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The ELM 2-460 accepts the ELM 4-440 as a parametric equivalent based on the following allowable substitution criteria:

Critical Compatibility Parameters:

• LED Type: T1 (identical across both parts)
• Material: PVC (identical across both parts)
• Color: Black (identical across both parts)
• Manufacturer: Bivar Inc. (identical across both parts)
• RoHS Status: ROHS3 Compliant (identical across both parts)
• MSL Rating: 1 (Unlimited) (identical across both parts)

Variable Parameter Allowing Substitution:

• Length: 0.460" (11.68mm) for ELM 2-460 versus 0.440" (11.18mm) for ELM 4-440

The 0.020" (0.5mm) dimensional difference in length, combined with series variation (ELM 2 vs. ELM 4), defines the substitution scope. Both parts maintain identical LED specifications, material composition, and environmental compliance ratings, establishing the basis for cross-series compatibility when length tolerance permits.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 2-460 and ELM 4-440 maintain active product status with ROHS3 compliance and identical MSL ratings of 1 (Unlimited). The selection between these two parts depends solely on the mechanical tolerance requirement for the 0.020" length differential. The ELM 4-440 provides the shorter standoff at 0.440" (11.18mm), while the ELM 2-460 provides the taller standoff at 0.460" (11.68mm). Part availability shows 677 units of ELM 2-460 and 991 units of ELM 4-440 in current inventory. Component selection should be determined by design-specific height requirements for LED placement within the target assembly.

Frequently Asked Questions (FAQ)

Q: What makes the ELM 4-440 a valid substitute for the ELM 2-460? A: Both parts share identical LED type (T1), material (PVC), color (black), manufacturer (Bivar Inc.), RoHS compliance status, and moisture sensitivity rating. The only difference is length: 0.020" (0.5mm). This dimensional variation allows cross-series substitution when the height tolerance of the application permits the shorter standoff.

Q: Can the ELM 4-440 be used in any application requiring an ELM 2-460? A: Substitution is valid only when the design height tolerance accommodates the 0.440" (11.18mm) length of the ELM 4-440 in place of the specified 0.460" (11.68mm). The application mechanical envelope and LED clearance requirements must support this 0.020" reduction.

Q: Are there any compliance or environmental differences between these parts? A: No. Both parts carry ROHS3 compliance certification and MSL Level 1 (Unlimited moisture sensitivity rating), confirming identical environmental and regulatory compatibility.

Q: How does packaging affect part selection? A: Both parts are supplied in bag packaging. No material handling, storage, or packaging-related constraints differentiate these components. Selection criteria remain limited to mechanical height specification and application requirements.