ELM 2-380 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-380 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.380" (9.65mm) length specification. The part maintains Active product status and is RoHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity protection.

Substitute parts become necessary when the primary part experiences inventory constraints, supply chain disruptions, or when design specifications allow for dimensional or material variations within acceptable tolerances. Alternative models listed below provide functional equivalence while maintaining compliance with industry standards.

Substiute Parts

ELM 2-380

Bivar Inc.In Stock: 783ELM 2-380 Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 2-380 is determined by the following critical parameters:

LED Type Requirement: All substitute parts must accommodate T1 LED form factors. This ensures mechanical and electrical compatibility with existing circuit board layouts and LED component specifications.

Mounting Configuration: Vertical mounting (SR VERT) is maintained across all substitutes, preserving PCB assembly compatibility and spatial requirements.

Material Composition: Substitutes may utilize either PVC or Nylon materials. Both materials provide equivalent mechanical performance and environmental protection for T1 LED standoff applications.

Dimensional Tolerance: Length specifications range from 0.365" (9.27mm) to 0.390" (9.91mm). This 0.025" (0.64mm) variance accommodates manufacturing tolerances and minor design variations without affecting functional performance in standard LED mounting applications.

Compliance Standards: All substitute parts maintain ROHS3 compliance and MSL 1 rating, ensuring regulatory equivalence and moisture protection consistency.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-365 Selection: This substitute maintains identical series designation (ELM 2) and material composition (PVC) as the primary part. The 0.015" (0.38mm) length reduction represents a minor dimensional variance within standard manufacturing tolerances. This part offers the highest inventory availability at 16,125 units, making it suitable for applications where minimal length variation is acceptable.

ELM 5-390 Selection: This substitute provides a 0.010" (0.25mm) length increase and transitions to the ELM 5 series. PVC material composition remains consistent with the primary part. Inventory availability is moderate at 2,242 units. Selection is appropriate when slightly increased standoff height accommodates circuit board design requirements.

H-201C Selection: This substitute maintains identical length specification (0.380") to the primary part but introduces Nylon material composition in place of PVC. Nylon provides equivalent mechanical performance and environmental protection while offering superior inventory availability at 63,104 units. This part is suitable for applications where material substitution does not conflict with design specifications or environmental requirements.

Compliance Consistency: All substitute parts maintain Active product status, ROHS3 compliance, and MSL 1 rating. No regulatory or environmental protection compromises exist across the substitute selection.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-365 be used as a direct replacement for ELM 2-380?

A: ELM 2-365 is a parametric equivalent with a 0.015" (0.38mm) shorter length. Both parts share identical series designation, material (PVC), LED type (T1), and compliance ratings. Substitution is valid when circuit board design tolerances accommodate the reduced standoff height.

Q: What is the primary difference between ELM 5-390 and ELM 2-380?

A: ELM 5-390 differs in series designation (ELM 5 versus ELM 2) and provides a 0.010" (0.25mm) longer standoff. Material composition (PVC) and all compliance parameters remain equivalent. Series transition reflects manufacturing line differences without affecting functional performance.

Q: Why would H-201C be selected over PVC alternatives?

A: H-201C maintains the exact length specification (0.380") of the primary part while utilizing Nylon material instead of PVC. Selection is driven by significantly higher inventory availability (63,104 units) and material compatibility with specific application requirements. Nylon provides equivalent mechanical and environmental protection.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed—ELM 2-365, ELM 5-390, and H-201C—maintain ROHS3 compliance identical to the primary ELM 2-380 part. No regulatory differences exist across the substitution options.

Q: What is the maximum acceptable length variance among these substitutes?

A: The length range spans from 0.365" (ELM 2-365) to 0.390" (ELM 5-390), representing a 0.025" (0.64mm) total variance. This tolerance accommodates standard manufacturing specifications for T1 LED standoff applications without affecting functional performance in typical circuit board designs.

Q: Do material differences between PVC and Nylon affect electrical performance?

A: No. Both PVC and Nylon materials serve as mechanical standoffs and insulators. Material selection is determined by mechanical durability requirements, environmental exposure, and design specifications rather than electrical characteristics. Both materials maintain MSL 1 rating and ROHS3 compliance.

Q: Which substitute offers the best inventory availability?

A: H-201C provides the highest inventory level at 63,104 units. This part is recommended when supply chain optimization is a priority and material substitution (Nylon for PVC) is acceptable within design parameters.