ELM 2-370 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-370 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component features a black PVC construction with a 0.370" (9.40mm) length specification. The part maintains Active product status and is RoHS3 compliant, making it suitable for current electronic assembly requirements. Equivalent and substitute parts are identified based on matching functional parameters including LED type, color, material compatibility, and dimensional tolerances within acceptable ranges for T1 LED standoff applications.

Substiute Parts

ELM 2-370

Bivar Inc.In Stock: 986ELM 2-370 Datasheet

Current PartRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 2-370 are identified based on the following critical parameters:

Primary Matching Criteria:

• LED Type: T1 (mandatory match)
• Color: Black (mandatory match)
• RoHS3 Compliance: Required
• MSL Rating: 1 (Unlimited)
• Product Status: Active

Allowable Variation Parameters:

• Length: Within ±0.015" (±0.38mm) tolerance range
• Material: PVC or equivalent polymer (Nylon acceptable for mechanical compatibility)

The ELM 2-365 qualifies as a parametric equivalent with a length of 0.365" (9.27mm), representing a 0.005" (0.13mm) dimensional variance within acceptable substitution tolerance. The H-201C qualifies as a functional equivalent despite material variation (Nylon vs. PVC) and length variance of 0.010" (0.25mm), as both parameters remain within acceptable ranges for T1 LED standoff applications.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-365 Selection Criteria: The ELM 2-365 is the primary substitute for the ELM 2-370, offering identical material composition (PVC), color specification (Black), and LED type (T1). The length differential of 0.005" (0.13mm) represents a minimal dimensional variance suitable for applications where PCB clearance tolerances accommodate this reduction. Both parts maintain identical RoHS3 compliance, MSL ratings, and Active product status, ensuring equivalent regulatory and supply chain characteristics.

H-201C Selection Criteria: The H-201C functions as an alternative substitute where material flexibility is acceptable. The Nylon construction provides equivalent mechanical performance for T1 LED standoff applications while maintaining Black color and T1 LED type specifications. The length of 0.380" (9.65mm) represents a 0.010" (0.25mm) increase over the main part, suitable for applications requiring additional standoff height. RoHS3 compliance and Active product status confirm regulatory equivalence.

Inventory Availability: ELM 2-365 maintains 16,125 units in stock, and H-201C maintains 63,104 units in stock, providing superior availability compared to the main part's 887 units.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-365 be used as a direct replacement for ELM 2-370?

A: Yes. The ELM 2-365 is a parametric equivalent with identical LED type (T1), color (Black), material (PVC), and compliance specifications. The length difference of 0.005" (9.27mm vs. 9.40mm) is within acceptable tolerance for T1 LED standoff applications.

Q: What is the primary difference between ELM 2-365 and H-201C?

A: The primary differences are material composition and length. ELM 2-365 uses PVC with 0.365" length, while H-201C uses Nylon with 0.380" length. Both maintain T1 LED type, Black color, and full RoHS3 compliance.

Q: Is material substitution (PVC to Nylon) acceptable?

A: Yes, for T1 LED standoff applications. Both PVC and Nylon provide suitable mechanical properties and environmental resistance. Material selection depends on specific application requirements for thermal or chemical resistance.

Q: Do all substitute parts have identical RoHS and MSL ratings?

A: Yes. ELM 2-370, ELM 2-365, and H-201C all maintain ROHS3 compliance and MSL rating of 1 (Unlimited), ensuring equivalent regulatory and storage requirements.

Q: What is the maximum acceptable length variation for substitution?

A: For T1 LED standoff applications, length variations up to ±0.015" (±0.38mm) are acceptable. ELM 2-365 varies by 0.005" and H-201C varies by 0.010", both within this tolerance.

Q: Are all substitute parts currently in Active product status?

A: Yes. ELM 2-370, ELM 2-365, and H-201C all maintain Active product status, confirming current availability and long-term supply viability.

Q: Can packaging format affect substitution decisions?

A: No. All three parts are supplied in Bag packaging format, eliminating packaging as a substitution variable.