ELM 2-355 T1 LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-355 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical surface mounting applications. This component features a black PVC construction with a 0.355" (9.02mm) length specification. The part maintains Active product status and is RoHS3 compliant, making it suitable for current production environments. Equivalent substitute parts are identified based on matching electrical characteristics, mechanical form factor compatibility, and material specifications within the ELM 2 series.

Substiute Parts

ELM 2-355

Bivar Inc.In Stock: 851ELM 2-355 Datasheet

Current PartRFQ

ELM 2-350

Bivar Inc.In Stock: 3583ELM 2-350 Datasheet

Parametric EquivalentRFQ

ELM 2-365

Bivar Inc.In Stock: 16177ELM 2-365 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts within the ELM 2 series are qualified based on the following criteria:

Matching Parameters:

• Manufacturer: Bivar Inc.
• Series: ELM 2
• LED Type: T1
• Color: Black
• Material: PVC
• Packaging: Bag
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Variable Parameter:

• Length: Substitutes vary within the range of 0.350" to 0.365" (8.89mm to 9.27mm)

The ELM 2-350, ELM 2-355, and ELM 2-365 are parametric equivalents within the same product family. Length variations accommodate different PCB standoff height requirements while maintaining identical electrical performance, mechanical interface compatibility, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ELM 2-355, ELM 2-350, and ELM 2-365—maintain Active product status and are ROHS3 compliant. Selection between these equivalents is determined by the specific PCB standoff height requirement for your application. The 0.005" (0.13mm) length variation between ELM 2-350 and ELM 2-355, and the 0.010" (0.25mm) variation between ELM 2-355 and ELM 2-365, accommodates different circuit board clearance specifications. All parts share identical electrical performance, mechanical interface characteristics, and regulatory compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-350, ELM 2-355, and ELM 2-365 be used interchangeably?

A: These parts are parametric equivalents within the ELM 2 series and share identical electrical and mechanical specifications except for length. Interchangeability depends on your PCB standoff height tolerance. Verify that the specific length requirement of your application matches the selected part number.

Q: What is the significance of the length variation between these parts?

A: Length variations (0.350", 0.355", 0.365") determine the vertical distance between the PCB surface and the LED component. Selection is based on your circuit board design requirements and clearance specifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. ELM 2-350, ELM 2-355, and ELM 2-365 are all ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What packaging format is used for these parts?

A: All parts in this group are supplied in Bag packaging.

Q: Do these parts have different electrical performance characteristics?

A: No. All parts are T1 LED standoffs with identical electrical performance. Differences are limited to physical length specifications.