ELM 2-300 LED Holder T1 3MM PVC Black – Equivalent & Substitute Parts

Part Overview

The ELM 2-300 is an active T1 LED standoff manufactured by Bivar Inc., designed to hold 3mm T1 LEDs in a vertical or semi-vertical orientation. This black PVC holder features a 0.300" (7.62mm) standoff length and is commonly used in electronic assemblies requiring fixed LED positioning and spacing from PCBs. The part is RoHS3 compliant and carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity constraints during storage or handling. Finding equivalent substitute parts is necessary to ensure supply chain continuity, manage inventory across multiple suppliers, and maintain design flexibility in component sourcing.

Substiute Parts

ELM 2-300

Bivar Inc.In Stock: 841ELM 2-300 Datasheet

Current PartRFQ

LEDM-2-08

Essentra ComponentsIn Stock: 819LEDM-2-08 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 2-300 are identified based on strict parameter matching within the T1 LED holder category. The primary substitution criteria are:

1. LED Type: Must accommodate T1 (3mm) LEDs
2. Material Composition: PVC construction required
3. Color: Black finish
4. Compliance: RoHS compliance status (RoHS3 or equivalent RoHS Compliant)
5. Moisture Sensitivity: MSL 1 rating or equivalent unlimited moisture tolerance
6. Product Status: Active status ensures ongoing availability

The LEDM-2-08 meets these core criteria. While the standoff length differs (0.315" vs. 0.300"), both parts function within the T1 LED holder category and share identical material, color, compliance, and moisture sensitivity specifications. Length variation of 0.015" (0.38mm) falls within typical mechanical tolerance ranges for LED positioning applications.

Parameter Comparison

Engineering Selection Recommendations

Both the ELM 2-300 and LEDM-2-08 are active products with confirmed inventory availability. Selection between these parts should be based on the following engineering factors:

ELM 2-300 (Bivar Inc.): Use when the exact 0.300" (7.62mm) standoff length is specified in the design. RoHS3 compliance provides the highest regulatory standard. Current inventory: 796 pieces.

LEDM-2-08 (Essentra Components): Use as a substitute when a 0.315" (8.00mm) standoff length is acceptable within design tolerances. RoHS compliance status is confirmed. Current inventory: 752 pieces. The LEDM-2 series designation indicates this part belongs to an established product line with consistent supply.

Both parts carry identical MSL 1 ratings and EAR99 export classifications, ensuring equivalent handling and regulatory treatment. Material, color, and LED type specifications are identical across both options.

Frequently Asked Questions (FAQ)

Q: Can LEDM-2-08 be used as a direct replacement for ELM 2-300?

A: Yes, within design tolerance limits. The primary difference is standoff length: LEDM-2-08 is 0.015" (0.38mm) longer. If your PCB layout and LED positioning design accommodates this length variation, the LEDM-2-08 is functionally equivalent. Both parts hold T1 LEDs in identical black PVC material with matching compliance certifications.

Q: Are there any compliance or regulatory differences between these parts?

A: Both parts are RoHS compliant (ELM 2-300 is RoHS3; LEDM-2-08 is RoHS Compliant). Both carry EAR99 export classification and MSL 1 moisture sensitivity ratings. No regulatory barriers exist to substitution.

Q: What is the significance of the 0.015" length difference?

A: This difference represents approximately 2% variation in standoff height. For most LED positioning applications, this falls within standard mechanical tolerances. However, if your design specifies exact 0.300" spacing for LED-to-PCB distance or clearance requirements, verify that the 0.315" length does not violate design constraints before substitution.

Q: Are both parts available in bulk packaging?

A: Yes. Both ELM 2-300 and LEDM-2-08 are supplied in bulk packaging. Current inventory levels are 796 pieces (ELM 2-300) and 752 pieces (LEDM-2-08).

Q: Can I mix these parts in the same assembly?

A: Mixing is possible if your design accommodates the length variation. However, for visual consistency and predictable LED height uniformity, using a single part number per assembly is recommended.