ELM 2-260 Equivalent & Substitute Parts

Part Overview

The ELM 2-260 is a T1 LED standoff manufactured by Bivar Inc., featuring a black PVC construction with a 0.250" (6.35mm) length. This component is classified as an active product and serves as a mechanical mounting solution for T1-format LEDs in vertical orientation. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the product line, ensuring functional interchangeability in applications where the original part may be unavailable or inventory constraints require alternative sourcing.

Substiute Parts

ELM 2-260

Bivar Inc.In Stock: 852ELM 2-260 Datasheet

Current PartRFQ

ELM 4-6MM

Bivar Inc.In Stock: 1817ELM 4-6MM Datasheet

Parametric EquivalentRFQ

H-131C-1-120

Bivar Inc.In Stock: 1967H-131C-1-120 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 2-260 is determined by the following critical parameters:

Primary Substitution Criteria:

• LED format compatibility (T1)
• Color specification (Black)
• Orientation (Vertical)
• RoHS3 compliance
• Moisture Sensitivity Level (MSL 1)
• Manufacturer (Bivar Inc.)

Secondary Consideration:

• Material composition (PVC or equivalent polymeric material)
• Length tolerance within application requirements

The ELM 4-6MM and H-131C-1-120 are identified as parametric equivalents based on matching LED format, color, orientation, compliance certifications, and moisture sensitivity ratings. Variations in material composition (PVC versus Nylon) and minor length differences (0.240" versus 0.250") represent acceptable substitution parameters when mechanical mounting requirements permit such tolerances.

Parameter Comparison

Engineering Selection Recommendations

All three parts—ELM 2-260, ELM 4-6MM, and H-131C-1-120—maintain active product status with ROHS3 compliance and MSL 1 ratings, confirming their suitability for equivalent applications. The ELM 2-260 and H-131C-1-120 share identical length specifications (0.250"), making H-131C-1-120 the preferred substitute when material substitution from PVC to Nylon is acceptable within application constraints. The ELM 4-6MM presents a 0.010" (0.25mm) length reduction, requiring dimensional verification against specific mounting requirements before selection. All parts are manufactured by Bivar Inc., ensuring consistent quality and compliance standards across the substitution group.

Frequently Asked Questions (FAQ)

Q: Can ELM 4-6MM be used as a direct replacement for ELM 2-260?

A: ELM 4-6MM is a parametric equivalent with matching LED format (T1), color (Black), orientation (Vertical), and compliance ratings. The length difference of 0.010" (0.25mm) must be evaluated against specific application mounting tolerances. Both parts are PVC construction and maintain identical MSL and RoHS certifications.

Q: What is the material difference between ELM 2-260 and H-131C-1-120?

A: ELM 2-260 is constructed from PVC, while H-131C-1-120 uses Nylon. Both materials are black polymeric compounds with equivalent electrical and moisture sensitivity properties. Material selection depends on application-specific requirements for chemical resistance, temperature range, or mechanical durability.

Q: Are all three parts ROHS3 compliant?

A: Yes. ELM 2-260, ELM 4-6MM, and H-131C-1-120 are all ROHS3 compliant with MSL 1 (Unlimited) ratings, confirming their eligibility for equivalent substitution in regulated applications.

Q: Does length variation affect substitution eligibility?

A: Length differences between parts must be evaluated within the context of specific application mounting geometry. ELM 2-260 and H-131C-1-120 share identical 0.250" length specifications. ELM 4-6MM operates at 0.240" length and requires dimensional verification before selection.

Q: What packaging format is used for these parts?

A: All three parts are supplied in Bag packaging format, consistent with standard component distribution for LED standoff assemblies.