ELM 2-195 Equivalent & Substitute Parts

Part Overview

The ELM 2-195 is a T1 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications requiring a 0.195" (4.95mm) height specification. This component is constructed from black PVC material and accommodates standard T1 LED packages with a 2-lead configuration. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity tolerance (MSL 1). Substitute parts are identified when dimensional, material, or functional specifications align within acceptable tolerances for the intended application, or when inventory availability necessitates alternative sourcing from the same manufacturer series.

Substiute Parts

ELM 2-195

Bivar Inc.In Stock: 1048ELM 2-195 Datasheet

Current PartRFQ

ELM 2-5MM

Bivar Inc.In Stock: 2854ELM 2-5MM Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ELM 2-195 is determined by the following critical parameters:

Primary Substitution Criteria:

• Manufacturer: Bivar Inc. (same manufacturer required)
• Series: ELM 2 (same product series required)
• LED Type: T1 (same LED package type required)
• Material: Black PVC (same material composition required)
• Mounting Orientation: Vertical (same orientation required)
• Lead Configuration: 2-Lead (same lead count required)
• RoHS Status: ROHS3 Compliant (equivalent or superior compliance required)
• Moisture Sensitivity Level: 1 (same or lower MSL required)

Secondary Consideration:

• Length: Dimensional tolerance within application requirements (0.195" nominal with acceptable variance)

The ELM 2-5MM qualifies as a parametric equivalent within the ELM 2 series, sharing all primary substitution criteria. The length specification differs at 0.200" (5.08mm) versus 0.195" (4.95mm), representing a 0.005" (0.13mm) dimensional variance. This variance is permissible for applications where vertical standoff height tolerance accommodates the difference.

Parameter Comparison

Engineering Selection Recommendations

ELM 2-195 Selection Criteria:

• Applications requiring exact 0.195" (4.95mm) vertical standoff height
• Designs with tight dimensional tolerances on LED mounting height
• Current inventory availability: 963 pieces

ELM 2-5MM Selection Criteria:

• Applications tolerating 0.200" (5.08mm) vertical standoff height
• Designs where 0.005" (0.13mm) height variance is acceptable
• Designs where increased standoff height provides functional benefit
• Current inventory availability: 2755 pieces

Both parts maintain Active product status and ROHS3 compliance. Selection between ELM 2-195 and ELM 2-5MM is determined by application-specific height requirements and tolerance specifications. The ELM 2-5MM offers significantly higher inventory availability, supporting supply chain continuity for high-volume applications.

Frequently Asked Questions (FAQ)

Q: Can ELM 2-5MM be used as a direct replacement for ELM 2-195?

A: ELM 2-5MM is a parametric equivalent within the ELM 2 series with identical material, LED type, lead configuration, and compliance specifications. The 0.005" (0.13mm) length difference must be evaluated against application height tolerances. If the design accommodates 0.200" (5.08mm) standoff height, substitution is valid.

Q: What is the dimensional tolerance difference between these parts?

A: ELM 2-195 specifies 0.195" (4.95mm) length, while ELM 2-5MM specifies 0.200" (5.08mm) length. This represents a 0.005" (0.13mm) variance. Substitution feasibility depends on application-specific height requirements and PCB layout constraints.

Q: Are both parts RoHS compliant?

A: Yes. Both ELM 2-195 and ELM 2-5MM are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: Do these parts share the same packaging format?

A: Yes. Both parts are supplied in Bag packaging format.

Q: Which part should be selected for new designs?

A: For new designs, evaluate the application's vertical standoff height requirement. If 0.200" (5.08mm) is acceptable, ELM 2-5MM is recommended due to higher inventory availability (2755 pieces versus 963 pieces). If exact 0.195" (4.95mm) height is required, ELM 2-195 is the appropriate selection.

Q: Are there any electrical performance differences between these parts?

A: Both parts are mechanical standoffs for T1 LED packages. Electrical performance is determined by the LED component itself, not the standoff. The standoff provides mechanical positioning and height specification only.