ELM 2-10MM LED Standoff Equivalent & Substitute Parts

Part Overview

The ELM 2-10MM is an active-status T1 LED standoff manufactured by Bivar Inc., featuring a 0.390" (9.91mm) vertical mount configuration with PVC construction. This component is utilized as a mechanical and optical mounting solution for T1 LED packages in 2-lead configurations. Finding equivalent or substitute models becomes necessary when managing inventory optimization, supply chain continuity, or specific application requirements related to material or mechanical compatibility.

Substiute Parts

ELM 2-10MM

Bivar Inc.In Stock: 1025ELM 2-10MM Datasheet

Current PartRFQ

ELM 5-390

Bivar Inc.In Stock: 2282ELM 5-390 Datasheet

Parametric EquivalentRFQ

H-201C

Bivar Inc.In Stock: 63137H-201C Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ELM 2-10MM are identified based on strict electrical and mechanical parameter compatibility:

Primary Substitution Criteria:

• LED Type: T1 (both substitute parts maintain this specification)
• Lead Configuration: 2-Lead requirement across all variants
• Mounting Style: Vertical mounting orientation
• Color: Black housing (consistent across all options)
• Regulatory Compliance: ROHS3 Compliant status maintained
• Moisture Sensitivity: MSL 1 classification preserved

Critical Parameter Tolerance:

• Length: All substitute parts operate within the 0.380" to 0.391" range (0.380" to 9.91mm), representing a mechanical tolerance window acceptable for standoff applications in standard circuit board designs.

The two identified substitutes vary in base material composition (PVC versus Nylon), which is the primary differentiator. Both alternatives satisfy all core electrical, mechanical, and regulatory parameters required for interchangeability in standard T1 LED mounting applications.

Parameter Comparison

Engineering Selection Recommendations

ELM 5-390 Selection: Select ELM 5-390 when direct dimensional and material equivalence is required. This part maintains identical PVC material composition and exact 0.390" (9.91mm) length specification as the ELM 2-10MM. Product status is Active with full ROHS3 compliance and Unlimited MSL classification. This substitute operates as a full parametric equivalent for vertical mounting applications.

H-201C Selection: H-201C presents an alternative when material substitution to Nylon construction is acceptable within application constraints. While maintaining T1 LED type, 2-lead configuration, and black color, the H-201C features right-angle mounting geometry and operates at a slightly shorter 0.380" (9.65mm) length. Product status is Active with full ROHS3 compliance and Unlimited MSL rating. Selection of H-201C requires confirmation that right-angle mounting orientation and reduced length are mechanically compatible with the printed circuit board layout.

All three parts share identical regulatory status (ROHS3 Compliant, MSL 1 Unlimited), manufacturer origin (Bivar Inc.), and active product status, enabling selection based on specific application geometry and material requirements.

Frequently Asked Questions (FAQ)

Q: Are ELM 2-10MM and ELM 5-390 functionally identical? A: Yes. Both parts share identical specifications for LED type (T1), lead configuration (2-lead), mounting style (vertical), length (0.390"), color (black), material (PVC), and regulatory compliance (ROHS3). They are parametric equivalents suitable for direct substitution in circuit board designs.

Q: Can H-201C be used as a direct replacement for ELM 2-10MM? A: H-201C maintains compatibility in LED type, lead configuration, color, and regulatory compliance but differs in two dimensions: mounting style (right-angle instead of vertical) and length (0.380" versus 0.390"). Substitution is possible only if the printed circuit board layout accommodates right-angle mounting and the 0.010" (0.25mm) length reduction does not create mechanical interference.

Q: What is the significance of the material difference between PVC and Nylon options? A: Both PVC (ELM 2-10MM and ELM 5-390) and Nylon (H-201C) are standard materials for LED standoff construction and maintain identical Moisture Sensitivity Level 1 (Unlimited) classification. Selection between materials depends on application-specific requirements such as thermal environment, chemical exposure, or mechanical stress tolerance.

Q: Do all three parts meet the same regulatory requirements? A: Yes. ELM 2-10MM, ELM 5-390, and H-201C all comply with ROHS3 standards and maintain MSL 1 (Unlimited) moisture sensitivity classification. All parts share identical ECCN (EAR99) and are manufactured by Bivar Inc., ensuring consistent regulatory documentation.

Q: What packaging format is used for these components? A: All parts are supplied in standard bag packaging format, suitable for standard component inventory management and automated assembly operations.